مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

Polyarylate U-polymer C300VN UNITIKA JAPAN
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| thermal performance | شرایط آزمون | روش آزمون | UNITIKA JAPAN/U-polymer C300VN |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 155 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 6.5E-05 cm/cm/°C |
| mechanical properties | شرایط آزمون | روش آزمون | UNITIKA JAPAN/U-polymer C300VN |
|---|---|---|---|
| Bending modulus | ASTM D790 | 2500 MPa | |
| bending strength | ASTM D790 | 95.0 MPa | |
| elongation | Break | ASTM D638 | 40 % |
| tensile strength | ASTM D638 | 75.0 MPa |
| Electrical performance | شرایط آزمون | روش آزمون | UNITIKA JAPAN/U-polymer C300VN |
|---|---|---|---|
| Arc resistance | ASTM D495 | 125 sec | |
| Compared to the anti leakage trace index | IEC 60112 | PLC 3 | |
| Dielectric constant | 1MHz | ASTM D150 | 2.60 |
| Dielectric strength | ASTM D149 | 30 kV/mm | |
| Dissipation factor | 1MHz | ASTM D150 | 0.010 |
| Volume resistivity | ASTM D257 | 2E+16 ohms·cm |
| Physical properties | شرایط آزمون | روش آزمون | UNITIKA JAPAN/U-polymer C300VN |
|---|---|---|---|
| density | ASTM D792 | 1.29 g/cm³ | |
| Shrinkage rate | MD:3.00mm | ASTM D955 | 0.80 % |
| Water absorption rate | 24hr,3.18mm | ASTM D570 | 0.24 % |
| impact performance | شرایط آزمون | روش آزمون | UNITIKA JAPAN/U-polymer C300VN |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 65 J/m |