مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PPS C-2000SG15 IDEMITSU JAPAN
--
قطعات خودرو
مقاومت در برابر دمای بالا,بسته بندی: مواد معدنی شیش,70 درصد وزن بسته بندی
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
Supplementary Information | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-2000SG15 |
---|---|---|---|
Flowability2 | 1.00mm,Flowability | Internal Method | 9.10 CM |
hardness | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-2000SG15 |
---|---|---|---|
Rockwell hardness | M-Sale | ISO 2039-2 | 93 |
thermal performance | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-2000SG15 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 272 °C |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 2E-05 cm/cm/°C |
MD | ISO 11359-2 | 1.9E-05 cm/cm/°C |
mechanical properties | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-2000SG15 |
---|---|---|---|
Bending modulus | ISO 178 | 19100 Mpa | |
bending strength | ISO 178 | 161 Mpa | |
Tensile strain | Break | ISO 527-2 | 0.70 % |
tensile strength | ISO 527-2 | 89.0 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-2000SG15 |
---|---|---|---|
Dielectric constant | IEC 60250 | 6.50 | |
Dielectric strength | 1.00mm | IEC 60243-1 | 13 KV/mm |
3.00mm | IEC 60243-1 | 14 KV/mm | |
Dissipation factor | IEC 60250 | 0.023 | |
Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
Physical properties | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-2000SG15 |
---|---|---|---|
density | ISO 1183 | 2.10 g/cm³ | |
Shrinkage rate | MD | ISO 294-4 | 0.35 % |
TD | ISO 294-4 | 0.60 % | |
Water absorption rate | 23°C,24hr | ISO 62 | 0.010 % |
impact performance | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-2000SG15 |
---|---|---|---|
Impact strength of simply supported beam without notch | ISO 179 | 5.7 kJ/m² |
flammability | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-2000SG15 |
---|---|---|---|
UL flame retardant rating | 0.9mm | UL 94 | V-0 |