مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PA12 E62S3 EVONIK GERMANY
VESTAMID®
دنده,لوازم جانبی انتقال دهنده,لوازم ورزشی
آسان برای پردازش,مقاومت در برابر ضربه دمای,نور پایدار,ضد حلال,انعطاف پذیری بالا,تراکم پایین
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
thermal performance | شرایط آزمون | روش آزمون | EVONIK GERMANY/E62S3 |
---|---|---|---|
Hot deformation temperature | 0.45 MPa,Unannealed0.45 MPa,Unannealed | ISO 75-2/B | 100 °C |
1.8 MPa,Unannealed1.8 MPa,Unannealed | ISO 75-2/A | 45 °C | |
Linear coefficient of thermal expansion | MD:23~55℃MD:23 to 55℃ | ISO 11359-2 | 0.00020 1/℃ |
TD:23~55℃TD:23 to 55℃ | ISO 11359-2 | 0.00020 1/℃ | |
Vicat softening temperature | ---- | ISO 306/A | 165 °C |
---- | ISO 306/B | 110 °C |
mechanical properties | شرایط آزمون | روش آزمون | EVONIK GERMANY/E62S3 |
---|---|---|---|
Shore hardness | Shore DShore D | ISO 868 | 62 |
Tensile creep modulus | 1000 hr1000 hr | ISO 899-1 | 200 Mpa |
Tensile modulus | ISO 527-2 | 370 Mpa | |
Tensile strain | BreakBreak | ISO 527-2 | > 200 % |
tensile strength | ---- | ISO 527-2 | 42 Mpa |
50% Strain50% Strain | ISO 527-2 | 23 Mpa |
flame retardant performance | شرایط آزمون | روش آزمون | EVONIK GERMANY/E62S3 |
---|---|---|---|
1.60 mm??1.6 mm | 1.60mm | UL 94 | HB |
Electrical performance | شرایط آزمون | روش آزمون | EVONIK GERMANY/E62S3 |
---|---|---|---|
Compared to the anti leakage trace index | Solution ASolution A | IEC 60112 | PLC 0 |
Dielectric strength | IEC 60243-1 | 39 KV/mm | |
Dissipation factor | 23℃,100 Hz23°C, 100 Hz | IEC 60250 | 0.1 |
23℃,1 MHz23°C, 1 MHz | IEC 60250 | 0.12 | |
Relative permittivity | 23℃,1 MHz23°C, 1 MHz | IEC 60250 | 4 |
23℃,100 Hz23°C, 100 Hz | IEC 60250 | 9 | |
Surface resistivity | IEC 60093 | 100000000000000 ohms | |
Volume resistivity | IEC 60093 | 1000000000000 ohms·cm |
Physical properties | شرایط آزمون | روش آزمون | EVONIK GERMANY/E62S3 |
---|---|---|---|
density | ISO 1183 | 1.03 g/cm³ | |
Shrinkage rate | MDFlow | ISO 294-4 | 0.60 - 1.1 % |
TDAcross Flow | ISO 294-4 | 0.90 - 1.4 % | |
Stickiness | ISO 307 | 190 cm³/g | |
Water absorption rate | Saturation,23℃Saturation,23℃ | ISO 62 | 1.1 % |
impact performance | شرایط آزمون | روش آزمون | EVONIK GERMANY/E62S3 |
---|---|---|---|
Charpy Notched Impact Strength | -30℃,Complete Break-22°F, Complete Break | ISO 179/1eA | 8 kJ/m² |
23℃,Partial Break73°F, Partial Break | ISO 179/1eA | 120 kJ/m² | |
Impact strength of simply supported beam without notch | -30℃-30°C | ISO 179/1eU | No Break |
23℃23°C | ISO 179/1eU | No Break |