مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PESU 3300 ULT SOLVAY USA
VERADEL®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
thermal performance | شرایط آزمون | روش آزمون | SOLVAY USA/3300 ULT |
---|---|---|---|
Continuous use temperature | ASTM D794 | 180 °C | |
Glass transition temperature | DSC | 223 °C | |
Hot deformation temperature | HDT | ASTM D648 | 195 °C |
Linear coefficient of thermal expansion | ASTM D696 | 0.00058 cm/cm/℃ |
mechanical properties | شرایط آزمون | روش آزمون | SOLVAY USA/3300 ULT |
---|---|---|---|
bending strength | ASTM D790 | 114 Mpa | |
Elongation at Break | ASTM D638 | 25-75 % | |
Impact strength of cantilever beam gap | ASTM D256 | 53.4 J/m | |
Tensile modulus | ASTM D638 | 2470 Mpa | |
tensile strength | ASTM D638 | 88.9 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | SOLVAY USA/3300 ULT |
---|---|---|---|
Arc resistance | ASTM D495 | 50 sec | |
Dielectric constant | ASTM D150 | 3.2 | |
Dielectric strength | ASTM D149 | 16 KV/mm | |
Dissipation factor | ASTM D150 | 0.004 | |
Extreme Oxygen Index | ASTM D2863 | 40 % | |
Relative track index | ASTM D3638 | 150 V | |
Surface resistivity | ASTM D257 | 10 ohms | |
Volume resistivity | ASTM D257 | 10 ohm-cm |
Physical properties | شرایط آزمون | روش آزمون | SOLVAY USA/3300 ULT |
---|---|---|---|
melt mass-flow rate | ASTM D1238 | 16-25 g/10min | |
Water absorption rate | ASTM D570 | 0.56 % |