مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

ABS 4000PG LANXESS GERMANY
Novodur®Ultra
قطعات خارجی خودرو,کاربردهای خودرو
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
hardness | شرایط آزمون | روش آزمون | LANXESS GERMANY/4000PG |
---|---|---|---|
Ball Pressure Test | ISO 2039-1 | 100 Mpa |
thermal performance | شرایط آزمون | روش آزمون | LANXESS GERMANY/4000PG |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Annealed | ISO 75-2/A | 98.0 °C |
0.45MPa,Annealed | ISO 75-2/B | 103 °C | |
Linear coefficient of thermal expansion | MD | ISO 11359-2 | 9E-05 cm/cm/°C |
Vicat softening temperature | ISO 306/B50 | 107 °C |
mechanical properties | شرایط آزمون | روش آزمون | LANXESS GERMANY/4000PG |
---|---|---|---|
Bending modulus | ISO 178 | 2350 Mpa | |
bending strength | ISO 178 | 73.0 Mpa | |
Tensile modulus | ISO 527-2 | 2400 Mpa | |
Tensile strain | Yield,23°C | ISO 527-2 | 3.1 % |
Break,23°C | ISO 527-2 | >15 % | |
tensile strength | Yield,23°C | ISO 527-2 | 46.0 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | LANXESS GERMANY/4000PG |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 0 | |
Dielectric strength | 1.50mm | IEC 60243-1 | 38 KV/mm |
Dissipation factor | 1MHz | IEC 60250 | 8.5E-03 |
100Hz | IEC 60250 | 6.5E-03 | |
Relative permittivity | 100Hz | IEC 60250 | 3.00 |
1MHz | IEC 60250 | 2.90 | |
Surface resistivity | IEC 60093 | 1E+16 ohms | |
Volume resistivity | IEC 60093 | 1E+16 ohms·cm |
Physical properties | شرایط آزمون | روش آزمون | LANXESS GERMANY/4000PG |
---|---|---|---|
density | ISO 1183 | 1.05 g/cm³ | |
Melt Volume Flow Rate (MVR) | 220°C/10.0kg | ISO 1133 | 6.00 cm3/10min |
Shrinkage rate | ISO 294-4 | 0.50-0.80 % |
impact performance | شرایط آزمون | روش آزمون | LANXESS GERMANY/4000PG |
---|---|---|---|
Charpy Notched Impact Strength | -30°C | ISO 179 | 10 kJ/m² |
23°C | ISO 179 | 20 kJ/m² | |
Impact strength of cantilever beam gap | -30°C | ISO 180/A | 10 kJ/m² |
23°C | ISO 180/A | 23 kJ/m² |