plas

مقایسه مواد

اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگی‌ها
گواهی‌نامه‌ها
PA66 A218V15 SOLVAY SHANGHAI
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

برگه‌های اطلاعات پلاستیک

thermal performanceشرایط آزمونروش آزمونSOLVAY SHANGHAI/A218V15
Hot deformation temperature1.8 MPa, UnannealedISO 75-2/Af245 °C
Melting temperatureISO 11357-3263 °C
mechanical propertiesشرایط آزمونروش آزمونSOLVAY SHANGHAI/A218V15
Bending modulus23°CISO 1785300 Mpa
bending strength23°CISO 178-- Mpa
Tensile modulus23°CISO 527-2/1A6200 Mpa
Tensile strainBreak, 23°CISO 527-23.0 %
tensile strengthBreak, 23°CISO 527-2/1A125 Mpa
Electrical performanceشرایط آزمونروش آزمونSOLVAY SHANGHAI/A218V15
Compared to the anti leakage trace indexSolution AIEC 60112PLC 1
Dielectric strength2.00 mmIEC 60243-131 KV/mm
Dissipation factorIEC 602500.010
Surface resistivityIEC 600936.0E+15 ohms
Volume resistivityIEC 600931.0E+15 ohms·cm
Physical propertiesشرایط آزمونروش آزمونSOLVAY SHANGHAI/A218V15
Water absorption rate24 hr, 23°CISO 621.1 %
impact performanceشرایط آزمونروش آزمونSOLVAY SHANGHAI/A218V15
Impact strength of simply supported beam without notch23°CISO 179/1eU41 kJ/m²
flammabilityشرایط آزمونروش آزمونSOLVAY SHANGHAI/A218V15
Extreme Oxygen IndexISO 4589-224 %
UL flame retardant rating3.2 mmUL 94HB
injectionشرایط آزمونروش آزمونSOLVAY SHANGHAI/A218V15
drying temperature80 °C
Mold temperature70 to 100 °C
Suggested maximum moisture content0.20 %
Temperature at the front of the material cylinder280 to 290 °C
Temperature at the rear of the barrel270 to 280 °C
Temperature in the middle of the barrel275 to 285 °C