مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

SPS N WA7020 IDEMITSU JAPAN
XAREC™
--
تقویت فیبر شیشه ای
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| Basic Performance | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/N WA7020 |
|---|---|---|---|
| density | ISO 1183/B | 1.26 | |
| Water absorption rate | 24hr,23℃ | ISO 62 | 0.22 % |
| thermal performance | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/N WA7020 |
|---|---|---|---|
| Hot deformation temperature | 1.80MPa,Unannealed | ISO 75-2/A | 240 °C |
| 0.45MPa,Unannealed | ISO 75-2/B | 260 °C | |
| UL flame retardant rating | 1.50mm | UL 94 | HB |
| mechanical properties | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/N WA7020 |
|---|---|---|---|
| Bending modulus | ISO 178 | 7300 Mpa | |
| bending strength | ISO 178 | 215 Mpa | |
| Charpy Notched Impact Strength | ISO 179 | 7.00 KJ/m | |
| Fracture strain | ISO 527-2 | 3.0 % | |
| Impact strength of cantilever beam gap | ISO 180 | 7.00 KJ/m | |
| Impact strength of simply supported beam without notch | ISO 179 | 49.0 KJ/m | |
| Suspended wall beam without notch impact strength | ISO 180 | 43.0 KJ/m | |
| Tensile stress | Yield | ISO 527-2 | 145 Mpa |
| Electrical performance | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/N WA7020 |
|---|---|---|---|
| Dielectric constant | IEC 60250 | 3.100 | |
| Dielectric loss | IEC 60250 | 0.0340 | |
| Dielectric strength | IEC 60243-1 | 25.00 KV/mm | |
| Volume resistivity | IEC 60093 | 3.1E+15 ohm.cm |
| Physical properties | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/N WA7020 |
|---|---|---|---|
| Shrinkage rate | Flow | ISO 294-4 | 0.25-0.50 % |
| Across Flow | ISO 294-4 | 0.50-0.80 % |