مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PBT 330HR-ED3002 JAPAN POLYPLASTIC
DURANEX®
کاربردهای خودرو
مقاوم در برابر آب,30٪ GF,بسته بندی: مواد تقویت کنن,30%,بسته بندی بر اساس وزن
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
Supplementary Information | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/330HR-ED3002 |
---|---|---|---|
ColourNumber | EF2001/ED3002 |
hardness | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/330HR-ED3002 |
---|---|---|---|
Rockwell hardness | M-Scale | ISO 2039-2 | 100 |
thermal performance | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/330HR-ED3002 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 209 °C |
1.8Mpa | ISO 75-1/-2 | 209 °C | |
Linear coefficient of thermal expansion | MD:23to55°C | Internal Method | 2E-05 cm/cm/°C |
Across Flow | ISO 11359-2 | 9 | |
Flow | ISO 11359-2 | 2 | |
TD:23to55°C | Internal Method | 9E-05 cm/cm/°C | |
UL flame retardant rating | UL 94 | HB |
mechanical properties | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/330HR-ED3002 |
---|---|---|---|
Bending modulus | ISO 178 | 9100 Mpa | |
bending strength | ISO 178 | 230 Mpa | |
Charpy Notched Impact Strength | ISO 179/1eA | 11.0 KJ/m | |
Tensile strain | Break | ISO 527-2 | 2.6 % |
tensile strength | ISO 527-1/-2 | 149 Mpa | |
ISO 527-2 | 149 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/330HR-ED3002 |
---|---|---|---|
Dielectric strength | 3.00mm | IEC 60243-1 | 26 KV/mm |
Volume resistivity | IEC 60093 | 2E+16 ohms·cm |
Physical properties | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/330HR-ED3002 |
---|---|---|---|
Water absorption rate | 23°C,24hr | ISO 62 | 0.20 % |
flammability | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/330HR-ED3002 |
---|---|---|---|
UL flame retardant rating | UL 94 | HB |