مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PEEK 2000G EVONIK GERMANY
VESTAKEEP®
--
نیمه کریستالی,مقاومت شیمیایی,چسبندگی متوسط,خودش خاموش کن
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
thermal performance | شرایط آزمون | روش آزمون | EVONIK GERMANY/2000G |
---|---|---|---|
Linear coefficient of thermal expansion | MD:23to55°C | ISO 11359-2 | 6E-05 cm/cm/°C |
Melting temperature | ISO 11357-3 | 340 °C | |
Vicat softening temperature | -- | ISO 306/B | 310 °C |
-- | ISO 306/A | 335 °C |
mechanical properties | شرایط آزمون | روش آزمون | EVONIK GERMANY/2000G |
---|---|---|---|
Tensile modulus | ISO 527-2 | 3700 Mpa | |
Tensile strain | Yield | ISO 527-2 | 5.0 % |
Break | ISO 527-2 | 30 % | |
tensile strength | Yield | ISO 527-2 | 100 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | EVONIK GERMANY/2000G |
---|---|---|---|
Compared to the anti leakage trace index | SolutionA5 | IEC 60112 | PLC 3 |
SolutionA | IEC 60112 | PLC 3 | |
Dielectric strength | IEC 60243-1 | 16 KV/mm | |
Relative permittivity | 50Hz | IEC 60250 | 2.80 |
1MHz | IEC 60250 | 2.80 | |
Surface resistivity | IEC 60093 | 1E+14 ohms | |
Volume resistivity | IEC 60093 | 1E+15 ohms·cm |
Physical properties | شرایط آزمون | روش آزمون | EVONIK GERMANY/2000G |
---|---|---|---|
density | ISO 1183 | 1.30 g/cm³ | |
Melt Volume Flow Rate (MVR) | 380°C/5.0kg | ISO 1133 | 70.0 cm3/10min |
Shrinkage rate | MD:80°C,2.00mm | ISO 294-4 | 1.1 % |
TD:80°C,2.00mm | ISO 294-4 | 1.1 % |
impact performance | شرایط آزمون | روش آزمون | EVONIK GERMANY/2000G |
---|---|---|---|
Charpy Notched Impact Strength | -30°C,Complete Break | ISO 179/1eA | 6.0 kJ/m² |
23°C,Complete Break | ISO 179/1eA | 6.0 kJ/m² | |
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | NoBreak |
flammability | شرایط آزمون | روش آزمون | EVONIK GERMANY/2000G |
---|---|---|---|
Burning wire flammability index | 2.0mm | IEC 60695-2-12 | 960 °C |
Hot filament ignition temperature | 2.0mm | IEC 60695-2-13 | 800 °C |
UL flame retardant rating | 1.6mm | UL 94 | V-0 |