plas
انتخاب‌گر مواد
ورود
دسته‌بندی‌هاهمه
مقایسه مواد
افزودن مدل برای مقایسه
برجسته کردن تفاوت ها
مخفی کردن موارد مشابه

نام محصول / تولیدکننده / مدل

برند

کاربردهای معمول

ویژگی‌ها

رنگ

فرم

روش های پردازش

درجه

پرکننده

بازیافتی

گواهی‌نامه‌ها

قیمت مرجع

PC
PC SABIC INNOVATIVE NANSHA EXL1414 WH6D105
درجه تزریق
UL
US$ ۳٬۳۱۷ / MT
FOB Guangzhou port, China
mechanical propertiesشرایط آزمونروش آزمونSABIC INNOVATIVE NANSHA/EXL1414 WH6D105
elongationBreakASTM D63898 %
bending strengthISO 17885.0 Mpa
Tensile modulusASTM D6382020 Mpa
bending strengthYield,50.0mmSpanASTM D79092.4 Mpa
tensile strengthBreakASTM D63850.3 Mpa
Bending modulusISO 1782250 Mpa
Tensile strainYieldISO 527-2/506.0 %
elongationYieldASTM D6386.0 %
Bending modulus50.0mmSpanASTM D7902230 Mpa
Tensile modulusISO 527-2/12150 Mpa
tensile strengthBreakISO 527-2/5060.0 Mpa
YieldISO 527-2/5057.0 Mpa
Tensile strainBreakISO 527-2/50120 %
tensile strengthYieldASTM D63855.5 Mpa
Physical propertiesشرایط آزمونروش آزمونSABIC INNOVATIVE NANSHA/EXL1414 WH6D105
densityISO 11831.19 g/cm³
melt mass-flow rate300°C/1.2kgASTM D123810 g/10min
Shrinkage rateTD：3.20mmInternal Method0.40-0.80 %
densityASTM D7921.18 g/cm³
Water absorption rateEquilibrium,23°C,50%RHISO 620.15 %
Shrinkage rateMD：3.20mmInternal Method0.40-0.80 %
Water absorption rateSaturation,23°CISO 620.35 %
Melt Volume Flow Rate (MVR)300°C/1.2kgISO 11339.00 cm3/10min
Electrical performanceشرایط آزمونروش آزمونSABIC INNOVATIVE NANSHA/EXL1414 WH6D105
Surface resistivityASTM D257>1.0E+15 ohms
Dielectric constant100HzASTM D1502.68
Dissipation factor1MHzASTM D1509.3E-03
Volume resistivityASTM D257>1.0E+15 ohms·cm
Dielectric strength0.800mm,inOilASTM D14916 KV/mm
Dissipation factor100HzASTM D1501.2E-03
Dielectric constant1MHzASTM D1502.64
thermal performanceشرایط آزمونروش آزمونSABIC INNOVATIVE NANSHA/EXL1414 WH6D105
Linear coefficient of thermal expansionTD：-40to40°CASTME8317.5E-05 cm/cm/°C
MD：23to80°CISO 11359-27.2E-05 cm/cm/°C
Ball Pressure Test125°CIEC 60695-10-2Pass
Linear coefficient of thermal expansionTD：23to80°CISO 11359-27.2E-05 cm/cm/°C
RTI StrUL 746125 °C
Hot deformation temperature0.45MPa,Unannealed,100mmSpanISO 75-2/Be140 °C
Vicat softening temperatureASTM D152510145 °C
Hot deformation temperature1.8MPa,Unannealed,100mmSpanISO 75-2/Ae128 °C
Vicat softening temperature--ISO 306/B50145 °C
Hot deformation temperature1.8MPa,Unannealed,3.20mmASTM D648124 °C
Linear coefficient of thermal expansionMD：-40to40°CASTME8317E-05 cm/cm/°C
RTI ElecUL 746130 °C
RTI ImpUL 746120 °C
Vicat softening temperature--ISO 306/B120146 °C
Hot deformation temperature0.45MPa,Unannealed,3.20mmASTM D648139 °C
impact performanceشرایط آزمونروش آزمونSABIC INNOVATIVE NANSHA/EXL1414 WH6D105
Impact strength of simply supported beam without notch-30°CISO 179/1eUNoBreak
Impact strength of cantilever beam gap-30°CASTM D256770 J/m
Suspended wall beam without notch impact strength23°CISO 180/1UNoBreak
Charpy Notched Impact Strength-30°CISO 179/1eA65 kJ/m²
Impact strength of cantilever beam gap23°CASTM D256870 J/m
23°CISO 180/1A70 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eUNoBreak
Charpy Notched Impact Strength23°CISO 179/1eA70 kJ/m²
Dart impact23°C,TotalEnergyASTM D376370.0 J
Impact strength of cantilever beam gap-30°CISO 180/1A60 kJ/m²
Suspended wall beam without notch impact strength-30°CISO 180/1UNoBreak
flammabilityشرایط آزمونروش آزمونSABIC INNOVATIVE NANSHA/EXL1414 WH6D105
UL flame retardant rating0.40mmUL 94HB
Hot filament ignition temperature1.0mmIEC 60695-2-13875 °C
3.0mmIEC 60695-2-13875 °C
Burning wire flammability index0.8mmIEC 60695-2-12850 °C
1.0mmIEC 60695-2-12960 °C
hardnessشرایط آزمونروش آزمونSABIC INNOVATIVE NANSHA/EXL1414 WH6D105
Rockwell hardnessR-SaleASTM D785121
L-SaleASTM D78589

تماس با ما

دریافت اپلیکیشن

Top