مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

ABS/PBT BM5544 DAICEL JAPAN
NOVALLOY B  
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| thermal performance | شرایط آزمون | روش آزمون | DAICEL JAPAN/BM5544 | 
|---|---|---|---|
| Hot deformation temperature | 1.8 MPa, Unannealed | ISO 75-2/A | 155 °C | 
| mechanical properties | شرایط آزمون | روش آزمون | DAICEL JAPAN/BM5544 | 
|---|---|---|---|
| Bending modulus | ISO 178 | 11000 Mpa | |
| bending strength | ISO 178 | 205 Mpa | |
| tensile strength | ISO 527-2 | 130 Mpa | 
| Electrical performance | شرایط آزمون | روش آزمون | DAICEL JAPAN/BM5544 | 
|---|---|---|---|
| Surface resistivity | Internal Method | 4.0E+2 ohms | |
| Volume resistivity | Internal Method | 1.0E+2 ohms·cm | 
| Physical properties | شرایط آزمون | روش آزمون | DAICEL JAPAN/BM5544 | 
|---|---|---|---|
| Shrinkage rate | Flow | ASTM D955 | 0.20 - 0.40 % | 
| flammability | شرایط آزمون | روش آزمون | DAICEL JAPAN/BM5544 | 
|---|---|---|---|
| UL flame retardant rating | 1.5 mm | UL 94 | V-0 | 
| 1.2 mm | UL 94 | V-1 | 
| injection | شرایط آزمون | روش آزمون | DAICEL JAPAN/BM5544 | 
|---|---|---|---|
| Back pressure | 5.00 to 20.0 Mpa | ||
| drying temperature | 80 to 120 °C | ||
| drying time | 3.0 to 5.0 hr | ||
| Mold temperature | 60 to 80 °C | ||
| Screw speed | 50 to 90 rpm | ||
| Spray nozzle temperature | 230 to 250 °C | ||
| Temperature at the front of the material cylinder | 240 to 250 °C | ||
| Temperature at the rear of the barrel | 190 to 230 °C | ||
| Temperature in the middle of the barrel | 220 to 240 °C |