مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

HDPE 12110G DOW USA
DOW™
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
Other performance | شرایط آزمون | روش آزمون | DOW USA/12110G |
---|---|---|---|
Oxidation induction time (OIT) | 200℃ | DIN EN 728 | 1.5 hr |
Basic Performance | شرایط آزمون | روش آزمون | DOW USA/12110G |
---|---|---|---|
density | ISO 1183 | 0.958 g/m | |
melt mass-flow rate | 190℃/2.16kg | ISO 1133 | 0.55 g/10min |
thermal performance | شرایط آزمون | روش آزمون | DOW USA/12110G |
---|---|---|---|
Melting temperature | ISO 11357 | 128 °C | |
Vicat softening temperature | ISO 306 | 122 °C |
mechanical properties | شرایط آزمون | روش آزمون | DOW USA/12110G |
---|---|---|---|
Environmental stress cracking resistance | 50℃,10% Igepal,Compression Molded,F0 | IEC 60811-4-1/B | >1000 hr |
Shore hardness | Shore D,Compression Molded | ISO 868 | 61 |
tensile strength | Compression Molded,Break | ISO 527-2 | 32 Mpa |
Tensile stress | Compression Molded,Break | ISO 527-2 | 890 % |
Electrical performance | شرایط آزمون | روش آزمون | DOW USA/12110G |
---|---|---|---|
Dielectric constant | 1E+6Hz | IEC 60250 | 2.5 |
Dissipation factor | 50Hz | IEC 60250 | 0.0003 |
Volume resistivity | IEC 60093 | 1.2E+17 ohm·cm |