مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

ABS CN-P Westlake Plastics Company
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| thermal performance | شرایط آزمون | روش آزمون | Westlake Plastics Company/ CN-P |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 85.0 °C |
| mechanical properties | شرایط آزمون | روش آزمون | Westlake Plastics Company/ CN-P |
|---|---|---|---|
| Bending modulus | ASTM D790 | 1930 MPa | |
| bending strength | ASTM D790 | 49.6 MPa | |
| elongation | Break | ASTM D638 | 11 % |
| tensile strength | Yield | ASTM D638 | 27.6 MPa |
| Electrical performance | شرایط آزمون | روش آزمون | Westlake Plastics Company/ CN-P |
|---|---|---|---|
| StaticDecay | MILB-81705 | <0.1 sec | |
| Surface resistivity | ASTM D257 | 1.0E+2到1.0E+6 ohms | |
| Volume resistivity | ASTM D257 | 1.0E+2到1.0E+6 ohms·cm |
| Physical properties | شرایط آزمون | روش آزمون | Westlake Plastics Company/ CN-P |
|---|---|---|---|
| density | ASTM D792 | 1.03 g/cm³ | |
| Water absorption rate | 24hr | ASTM D570 | 0.30 % |
| impact performance | شرایط آزمون | روش آزمون | Westlake Plastics Company/ CN-P |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 53 J/m | |
| Suspended wall beam without notch impact strength | ASTM D256 | 720 J/m |
| flammability | شرایط آزمون | روش آزمون | Westlake Plastics Company/ CN-P |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |