مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PPE KR 2450-3 BASF GERMANY
LURANYL®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| thermal performance | شرایط آزمون | روش آزمون | BASF GERMANY/KR 2450-3 |
|---|---|---|---|
| Hot deformation temperature | 1.8 MPa,Unannealed1.8 MPa,Unannealed | ISO 75-2/A | 98 °C |
| Linear coefficient of thermal expansion | MD:23~80℃MD:23 to 80℃ | ISO 11359-2 | 6.0E-5 到 7.0E-5 1/℃ |
| thermal conductivity | DIN 52612 | 0.18 W/m/K | |
| Vicat softening temperature | B50B50 | ISO 306 | 116 °C |
| flame retardant performance | شرایط آزمون | روش آزمون | BASF GERMANY/KR 2450-3 |
|---|---|---|---|
| UL flame retardant rating | 0.75 mm | UL 94 | V-0 |
| mechanical properties | شرایط آزمون | روش آزمون | BASF GERMANY/KR 2450-3 |
|---|---|---|---|
| bending strength | 23℃23℃3 | ISO 178 | 105 Mpa |
| Tensile modulus | 23℃23℃ | ISO 527-1-2 | 2500 Mpa |
| Tensile strain | Yield,23℃Yield,23℃ | ISO 527-2/50 | 6 % |
| Physical properties | شرایط آزمون | روش آزمون | BASF GERMANY/KR 2450-3 |
|---|---|---|---|
| density | ISO 1183 | 1.09 g/cm³ | |
| Melt Volume Flow Rate (MVR) | 250℃,21.6 kg250℃/21.6 kg | ISO 1133 | 100 cm3/10min |
| Shrinkage rate | 23℃,3.2 mm23℃,3.20 mm | ISO 294-4 | 0.50 - 0.70 % |
| Water absorption rate | 23℃,24hr23℃,24 hr | ISO 62 | < 0.15 % |
| impact performance | شرایط آزمون | روش آزمون | BASF GERMANY/KR 2450-3 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23℃23°C | ISO 179/1eU | 无断裂 |
| -30℃-30°C | ISO 179/1eU | 无断裂 |