plas

مقایسه مواد

اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگی‌ها
گواهی‌نامه‌ها
PC 3022U SAMYANG KOREA
TRIREX®
زمینه خودرو,حوزه الکترونیک,زمینه برق
عقب نشینی,شفافیت
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

برگه‌های اطلاعات پلاستیک

thermal performanceشرایط آزمونروش آزمونSAMYANG KOREA/3022U
Hot deformation temperature1.8 MPa, UnannealedASTM D648134 °C
Linear coefficient of thermal expansionFlowASTM D6965.0E-5 - 7.0E-5 cm/cm/°C
mechanical propertiesشرایط آزمونروش آزمونSAMYANG KOREA/3022U
Bending modulusASTM D7902250 Mpa
bending strengthYieldASTM D79093.0 Mpa
elongationBreakASTM D638130 %
tensile strengthYieldASTM D63869.0 Mpa
Electrical performanceشرایط آزمونروش آزمونSAMYANG KOREA/3022U
Arc resistanceASTM D495120 sec
Dielectric strengthASTM D14930 KV/mm
Volume resistivityASTM D2574.0E+16 ohms·cm
Physical propertiesشرایط آزمونروش آزمونSAMYANG KOREA/3022U
melt mass-flow rate300°C/1.2 kgASTM D123816 g/10 min
Water absorption rate24 hr, 23°CASTM D5700.15 %
flammabilityشرایط آزمونروش آزمونSAMYANG KOREA/3022U
UL flame retardant rating1.6 mmUL 94V-2
optical performanceشرایط آزمونروش آزمونSAMYANG KOREA/3022U
turbidityASTM D10030.40 %
injectionشرایط آزمونروش آزمونSAMYANG KOREA/3022U
Back pressure0.250 to 0.700 Mpa
drying temperature120 °C
drying time3.0 to 5.0 hr
Exhaust hole depth0.020 to 0.080 mm
Mold temperature65 to 105 °C
Processing (melt) temperature265 to 300 °C
Screw speed40 to 70 rpm
Spray nozzle temperature265 to 300 °C
Suggested maximum moisture content0.020 %
Temperature at the front of the material cylinder265 to 290 °C
Temperature at the rear of the barrel235 to 260 °C
Temperature in the middle of the barrel250 to 275 °C