plas

مقایسه مواد

اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگی‌ها
گواهی‌نامه‌ها
PA66 SG2460B KA30 LG CHEM KOREA
LUMID® 
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

برگه‌های اطلاعات پلاستیک

hardnessشرایط آزمونروش آزمونLG CHEM KOREA/SG2460B KA30
Rockwell hardnessR-Scale, 23°C, InjectionASTM D785120
thermal performanceشرایط آزمونروش آزمونLG CHEM KOREA/SG2460B KA30
Hot deformation temperature1.8 MPa, Unannealed, 6.40 mm, InjectionASTM D648210 °C
Linear coefficient of thermal expansionFlowASTM D6963.0E-5 cm/cm/°C
Melting temperatureASTM D3418220 °C
mechanical propertiesشرایط آزمونروش آزمونLG CHEM KOREA/SG2460B KA30
Bending modulus23°C, 3.20 mm, InjectionASTM D79011800 Mpa
bending strength23°C, 3.20 mm, InjectionASTM D790275 Mpa
elongationBreak, 23°C, 3.20 mm, InjectionASTM D6383.0 %
tensile strengthBreak, 23°C, 3.20 mm, InjectionASTM D638196 Mpa
Electrical performanceشرایط آزمونروش آزمونLG CHEM KOREA/SG2460B KA30
Dielectric constant23°C, 1 MHzASTM D1504.00
Dielectric strength23°C, 1.00 mmASTM D14925 KV/mm
Volume resistivity23°CASTM D2571.0E+16 ohms·cm
Physical propertiesشرایط آزمونروش آزمونLG CHEM KOREA/SG2460B KA30
Shrinkage rate23°C, 3.20 mm, Injection,FlowASTM D9550.30 - 0.70 %
Water absorption rate24 hr, 23°CASTM D5700.60 %
injectionشرایط آزمونروش آزمونLG CHEM KOREA/SG2460B KA30
Back pressure29.4 to 58.8 Mpa
drying temperature80 to 100 °C
drying time4.0 to 5.0 hr
Mold temperature80 to 110 °C
Processing (melt) temperature270 to 295 °C
Screw speed30 to 60 rpm
Spray nozzle temperature270 to 295 °C
Temperature at the front of the material cylinder270 to 290 °C
Temperature at the rear of the barrel260 to 270 °C
Temperature in the middle of the barrel270 to 285 °C