مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PA6 PLS93G35DH1 BK549 DUPONT USA
Zytel®
قطعات الکترونیکی,کاربردهای خودرو
ثبات حرارتی,بسته بندی: مواد تقویت کنن,35 درصد پر کردن بر اساس و
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
thermal performance | شرایط آزمون | روش آزمون | DUPONT USA/PLS93G35DH1 BK549 |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 220 °C |
1.8MPa,Unannealed | ISO 75-2/A | 212 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 1E-04 cm/cm/°C |
MD | ISO 11359-2 | 7E-06 cm/cm/°C | |
Melting temperature | ISO 11357-3 | 224 °C |
mechanical properties | شرایط آزمون | روش آزمون | DUPONT USA/PLS93G35DH1 BK549 |
---|---|---|---|
Tensile modulus | ISO 527-2 | 12000 Mpa | |
Tensile strain | Break | ISO 527-2 | 3.5 % |
tensile strength | Break | ISO 527-2 | 200 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | DUPONT USA/PLS93G35DH1 BK549 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 1 | |
Surface resistivity | IEC 60093 | -- ohms | |
Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm |
Physical properties | شرایط آزمون | روش آزمون | DUPONT USA/PLS93G35DH1 BK549 |
---|---|---|---|
MediumDensity | 1.24 g/cm³ | ||
Shrinkage rate | MD | ISO 294-4 | 0.20 % |
TD | ISO 294-4 | 0.70 % | |
SpecificHeatCapacity of Melt | 2100 J/kg/°C | ||
ThermalConductivityofMelt | 0.28 W/m/K | ||
Top out temperature | 150 °C | ||
Water absorption rate | Saturation,23°C,2.00mm | ISO 62 | 2.0 % |
impact performance | شرایط آزمون | روش آزمون | DUPONT USA/PLS93G35DH1 BK549 |
---|---|---|---|
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 80 kJ/m² |
23°C | ISO 179/1eU | 100 kJ/m² |
flammability | شرایط آزمون | روش آزمون | DUPONT USA/PLS93G35DH1 BK549 |
---|---|---|---|
Burning rate | 1.00mm | ISO 3795 | <100 mm/min |
Flammability level | 1.5mm | IEC 60695-11-10,-20 | HB |
FMVSS flammability | FMVSS302 | B |