مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

TPU 1190A10 BASF GERMANY
Elastollan®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
hardness | شرایط آزمون | روش آزمون | BASF GERMANY/1190A10 |
---|---|---|---|
Shore hardness | ShoreA | ASTM D2240 | 90 |
Basic Performance | شرایط آزمون | روش آزمون | BASF GERMANY/1190A10 |
---|---|---|---|
density | ASTM D-792 | 1.13 |
thermal performance | شرایط آزمون | روش آزمون | BASF GERMANY/1190A10 |
---|---|---|---|
Glass transition temperature | Internal Method | -35.0 °C | |
Vicat softening temperature | ASTM D1525 | 120 °C | |
Internal Method | 100 °C |
mechanical properties | شرایط آزمون | روش آزمون | BASF GERMANY/1190A10 |
---|---|---|---|
300% tensile stress | ASTM D-412 | 17.2 Mpa | |
Bending modulus | ASTM D-790 | 44.8 Mpa | |
Injection | ASTM D790 | 29.0 Mpa | |
elongation | Break | ASTM D-412 | 580 % |
Shore hardness | shoreA | ASTM D-2240 | 91 |
Taber abraser | ASTM D1044 | 45.0 mg | |
tear strength | ASTM D-624 | 130 kN/m | |
Tensile modulus | Injection | ASTM D412 | 31.0 Mpa |
ASTM D-638 | 31 Mpa | ||
tensile strength | Break | ASTM D-412 | 36.5 Mpa |
Tensile stress | 100%伸长率 | ASTM D-412 | 10.3 Mpa |
Wear resistance | DIN 53516 | 25 mm³ |
Physical properties | شرایط آزمون | روش آزمون | BASF GERMANY/1190A10 |
---|---|---|---|
melt mass-flow rate | 190°C/21.6kg | ASTM D1238 | 10to40 g/10min |
190°C/10.0kg | ASTM D1238 | 10to20 g/10min |
elastomer | شرایط آزمون | روش آزمون | BASF GERMANY/1190A10 |
---|---|---|---|
elongation | Break | ASTM D412 | 460 % |
Permanent compression deformation | 23°C,22hr | ASTM D395B | 25 % |
70°C,22hr | ASTM D395B | 45 % | |
tear strength | ASTM D624 | 128 kN/m | |
tensile strength | 100%Strain | ASTM D412 | 12.4 Mpa |
300%Strain | ASTM D412 | 27.6 Mpa | |
ASTM D412 | 37.2 Mpa |