مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PA66 A218V40 BK SOLVAY FRANCE
TECHNYL®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| thermal performance | شرایط آزمون | روش آزمون | SOLVAY FRANCE/A218V40 BK |
|---|---|---|---|
| Hot deformation temperature | 1.8 MPa, Unannealed | ISO 75-2/Af | 255 °C |
| Melting temperature | ISO 11357-3 | 262 °C |
| mechanical properties | شرایط آزمون | روش آزمون | SOLVAY FRANCE/A218V40 BK |
|---|---|---|---|
| Bending modulus | 23°C | ISO 178 | 11000 Mpa |
| Tensile modulus | 23°C | ISO 527-2/1A | 13000 Mpa |
| Tensile strain | Break, 23°C | ISO 527-2 | 2.5 % |
| tensile strength | Break, 23°C | ISO 527-2/1A | 215 Mpa |
| Electrical performance | شرایط آزمون | روش آزمون | SOLVAY FRANCE/A218V40 BK |
|---|---|---|---|
| Compared to the anti leakage trace index | Solution A | IEC 60112 | PLC 1 |
| Dielectric strength | 2.00 mm | IEC 60243-1 | 35 KV/mm |
| Dissipation factor | IEC 60250 | 0.010 | |
| Relative permittivity | IEC 60250 | 3.70 | |
| Surface resistivity | IEC 60093 | 6.0E+15 ohms | |
| Volume resistivity | IEC 60093 | 1.0E+15 ohms·cm |
| Physical properties | شرایط آزمون | روش آزمون | SOLVAY FRANCE/A218V40 BK |
|---|---|---|---|
| Shrinkage rate | 横向Flow | ISO 294-4 | 0.90 % |
| Flow | ISO 294-4 | 0.35 % | |
| Water absorption rate | 24 hr, 23°C | ISO 62 | 0.70 % |
| Equilibrium, 23°C, 50% RH | ISO 62 | 1.9 % |
| impact performance | شرایط آزمون | روش آزمون | SOLVAY FRANCE/A218V40 BK |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 85 kJ/m² |
| flammability | شرایط آزمون | روش آزمون | SOLVAY FRANCE/A218V40 BK |
|---|---|---|---|
| Extreme Oxygen Index | ISO 4589-2 | 23 % | |
| UL flame retardant rating | 1.6 mm | UL 94 | HB |
| injection | شرایط آزمون | روش آزمون | SOLVAY FRANCE/A218V40 BK |
|---|---|---|---|
| drying temperature | 80 °C | ||
| Mold temperature | 70 to 100 °C | ||
| Suggested maximum moisture content | 0.20 % | ||
| Temperature at the front of the material cylinder | 280 to 300 °C | ||
| Temperature at the rear of the barrel | 270 to 280 °C | ||
| Temperature in the middle of the barrel | 280 to 290 °C |