مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PPO(PPE)+PS Iupiace® LN30 Mitsubishi Chemical Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| thermal performance | شرایط آزمون | روش آزمون | Mitsubishi Chemical Corporation/Iupiace® LN30 |
|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 105 °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 90.0 °C | |
| Linear coefficient of thermal expansion | TD | ISO 11359-2 | 5.8E-05 cm/cm/°C |
| MD | ISO 11359-2 | 5.5E-05 cm/cm/°C |
| mechanical properties | شرایط آزمون | روش آزمون | Mitsubishi Chemical Corporation/Iupiace® LN30 |
|---|---|---|---|
| Bending modulus | 23°C | ISO 178 | 2400 MPa |
| bending strength | 23°C | ISO 178 | 90.0 MPa |
| Nominal tensile fracture strain | 23°C | ISO 527-2 | 25 % |
| tensile strength | Yield,23°C | ISO 527-2 | 55.0 MPa |
| Electrical performance | شرایط آزمون | روش آزمون | Mitsubishi Chemical Corporation/Iupiace® LN30 |
|---|---|---|---|
| Surface resistivity | IEC 60093 | 2E+15 ohms | |
| Volume resistivity | IEC 60093 | 3E+16 ohms·cm |
| Physical properties | شرایط آزمون | روش آزمون | Mitsubishi Chemical Corporation/Iupiace® LN30 |
|---|---|---|---|
| density | ISO 1183 | 1.10 g/cm³ | |
| Melt Volume Flow Rate (MVR) | 300°C/2.16kg | ISO 1133 | 18.0 cm³/10min |
| Shrinkage rate | MD:3.20mm | 0.50to0.70 % | |
| TD:3.20mm | 0.50to0.70 % | ||
| Water absorption rate | Saturation,23°C | ISO 62 | 0.070 % |
| impact performance | شرایط آزمون | روش آزمون | Mitsubishi Chemical Corporation/Iupiace® LN30 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 15 kJ/m² |
| flammability | شرایط آزمون | روش آزمون | Mitsubishi Chemical Corporation/Iupiace® LN30 |
|---|---|---|---|
| UL flame retardant rating | 0.75mm | UL 94 | V-0 |
| 3.0mm | UL 94 | 5VA |