مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

ABS/PBT KU2-7604 LANXESS GERMANY
Pocan®
تجهیزات الکترونیکی
انحراف پایین,عقب نشینی
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
Supplementary Information | شرایط آزمون | روش آزمون | LANXESS GERMANY/KU2-7604 |
---|---|---|---|
ISO Shortcut | ISO 7792 | PBT+PC.GFHLMPR.11-020 |
hardness | شرایط آزمون | روش آزمون | LANXESS GERMANY/KU2-7604 |
---|---|---|---|
Ball Pressure Test | ISO 2039-1 | 93.0 Mpa |
thermal performance | شرایط آزمون | روش آزمون | LANXESS GERMANY/KU2-7604 |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 100 °C |
1.8MPa,Unannealed | ISO 75-2/A | 75.0 °C | |
Linear coefficient of thermal expansion | MD:23to55°C | ISO 11359-2 | 1E-04 cm/cm/°C |
TD:23to55°C | ISO 11359-2 | 1.1E-04 cm/cm/°C | |
Melting temperature | ISO 11357-3 | 225 °C | |
Vicat softening temperature | ISO 306/B120 | 115 °C |
mechanical properties | شرایط آزمون | روش آزمون | LANXESS GERMANY/KU2-7604 |
---|---|---|---|
Bending modulus | 23°C | ISO 178/A | 2000 Mpa |
Bending strain | 23°C | ISO 178/A | 5.0 % |
bending strength | 3.5%Strain,23°C | ISO 178/A | 65.0 Mpa |
23°C4 | ISO 178/A | 70.0 Mpa | |
Nominal tensile fracture strain | 23°C | ISO 527-2/50 | >20 % |
Tensile modulus | 23°C | ISO 527-2/1 | 2000 Mpa |
Tensile strain | Yield,23°C | ISO 527-2/50 | 3.5 % |
tensile strength | Yield,23°C | ISO 527-2/50 | 45.0 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | LANXESS GERMANY/KU2-7604 |
---|---|---|---|
Compared to the anti leakage trace index | SolutionA | IEC 60112 | V |
Physical properties | شرایط آزمون | روش آزمون | LANXESS GERMANY/KU2-7604 |
---|---|---|---|
Apparent density | ISO 60 | 0.80 g/cm³ | |
Melt Volume Flow Rate (MVR) | 260°C/5.0kg | ISO 1133 | 20.0 cm3/10min |
Shrinkage rate | MD:120°C,4hr,2.00mm3 | ISO 2577 | 0.80 % |
MD:250°C,2.00mm2 | ISO 2577 | 0.80 % | |
TD:250°C,2.00mm2 | ISO 2577 | 0.80 % | |
TD:120°C,4hr,2.00mm3 | ISO 2577 | 0.80 % | |
Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.10 % |
Saturation,23°C | ISO 62 | 0.30 % |
impact performance | شرایط آزمون | روش آزمون | LANXESS GERMANY/KU2-7604 |
---|---|---|---|
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | NoBreak |
23°C | ISO 179/1eU | NoBreak | |
Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | NoBreak |
23°C | ISO 180/1U | NoBreak |
flammability | شرایط آزمون | روش آزمون | LANXESS GERMANY/KU2-7604 |
---|---|---|---|
Burning wire flammability index | 0.8mm | IEC 60695-2-12 | 960 °C |
Hot filament ignition temperature | 3.0mm | IEC 60695-2-13 | 775 °C |
1.6mm | IEC 60695-2-13 | 775 °C | |
0.8mm | IEC 60695-2-13 | 775 °C | |
UL flame retardant rating | 0.8mm | UL 94 | V-0 |