مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

SEBS EMPILON® 355 EMPILON
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| hardness | شرایط آزمون | روش آزمون | EMPILON/EMPILON® 355 |
|---|---|---|---|
| Shore hardness | ShoreA,10Sec | ASTM D2240 | 56 |
| thermal performance | شرایط آزمون | روش آزمون | EMPILON/EMPILON® 355 |
|---|---|---|---|
| Brittle temperature | -55.0 °C |
| Physical properties | شرایط آزمون | روش آزمون | EMPILON/EMPILON® 355 |
|---|---|---|---|
| density | ASTM D792 | 1.23 g/cm³ | |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 10 g/10min |
| Shrinkage rate | TD | 0.90 % | |
| MD | 0.70 % |
| elastomer | شرایط آزمون | روش آزمون | EMPILON/EMPILON® 355 |
|---|---|---|---|
| elongation | Break | ASTM D412 | 300 % |
| Permanent compression deformation | 23°C,70hr | ASTM D395 | 25 % |
| tensile strength | 300%Strain | ASTM D412 | 1.18 MPa |
| ASTM D412 | 1.77 MPa |
| aging | شرایط آزمون | روش آزمون | EMPILON/EMPILON® 355 |
|---|---|---|---|
| Change rate of hardness (Shore) in the air | ShoreA,125°C,168hr | ASTM D573 | 12 |
| Change rate of tensile strength in air | 125°C,168hr | ASTM D573 | 56 % |
| Change rate of ultimate elongation in air | 125°C,168hr | ASTM D573 | 31 % |