مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PAS RTP 1605 RTP US
--
--
Filler, glass fiber reinforced material, 30%, filler by weight,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| thermal performance | شرایط آزمون | روش آزمون | RTP US/RTP 1605 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 210 °C |
| mechanical properties | شرایط آزمون | روش آزمون | RTP US/RTP 1605 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 8270 MPa | |
| bending strength | Yield | ASTM D790 | 207 MPa |
| elongation | Break | ASTM D638 | 2.2 % |
| Tensile modulus | ASTM D638 | 9650 MPa | |
| tensile strength | Yield | ASTM D638 | 149 MPa |
| Electrical performance | شرایط آزمون | روش آزمون | RTP US/RTP 1605 |
|---|---|---|---|
| Dielectric constant | 1MHz | ASTM D150 | 4.30 |
| Dielectric strength | ASTM D149 | 16 kV/mm | |
| Dissipation factor | 1MHz | ASTM D150 | 8E-03 |
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
| Physical properties | شرایط آزمون | روش آزمون | RTP US/RTP 1605 |
|---|---|---|---|
| density | ASTM D792 | 1.59 g/cm³ | |
| Shrinkage rate | MD | ASTM D955 | 0.10to0.20 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.36 % |
| impact performance | شرایط آزمون | روش آزمون | RTP US/RTP 1605 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 96 J/m |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D4812 | 640 J/m |
| flammability | شرایط آزمون | روش آزمون | RTP US/RTP 1605 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |