مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PA66 A3X2G5 BASF GERMANY
Ultramid®
کاربردهای الکتریکی,قطعات الکتریکی
عملکرد الکتریکی,عقب نشینی,مقاوم در برابر روغن
ULSGS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| thermal performance | شرایط آزمون | روش آزمون | BASF GERMANY/A3X2G5 |
|---|---|---|---|
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 250 1.8Mpa ℃(℉) |
| 0.45MPa负荷,Dry | 250 °C | ||
| 1.8MPa负荷,Dry | 250 °C | ||
| Linear coefficient of thermal expansion | (23-80)℃,Dry | 2.5-3.5/6-8 | |
| ASTM D696/ISO 11359 | 2.5-3.5/6-8 mm/mm.℃ | ||
| Maximum operating temperature | 220 °C | ||
| Melting temperature | 260 ℃(℉) | ||
| specific heat | Dry | 1.5 J/(g.K) | |
| Temperature index | 在20000h/5000h,后拉伸强度下降50%时 | 139/157 °C | |
| thermal conductivity | Dry | 0.27 W/(m.K) |
| mechanical properties | شرایط آزمون | روش آزمون | BASF GERMANY/A3X2G5 |
|---|---|---|---|
| Ball Pressure Test | 干/湿 | 190 Mpa | |
| Bending modulus | 干/湿 | 7100 Mpa | |
| Charpy Notched Impact Strength | 30℃,干 | 60 KJ/m | |
| +23℃,干/湿 | 65/70 KJ/m | ||
| ASTM D256/ISO 179 | 13/17 kg·cm/cm(J/M)ft·lb/in | ||
| elongation | ≤0.5%, +23℃,湿 | 3500 Mpa | |
| Elongation at Break | ASTM D638/ISO 527 | 3/4.5 % | |
| 干/湿,V=50mm/min | 3/4.5 % | ||
| Fracture stress (V=50mm/min) | 干/湿 | 140/100 Mpa | |
| impact strength | +23℃,干/湿 | 4/10 J | |
| Impact strength of cantilever beam gap | +23℃,干/湿 | 11/17 KJ/m | |
| Tensile creep modulus | 1000h,湿 | 3500 Mpa | |
| Tensile modulus | ASTM D638/ISO 527 | 8500/6000 kg/cm²(MPa)[Lb/in²] | |
| 干/湿 | 8500/6000 Mpa | ||
| tensile strength | ASTM D638/ISO 527 | 140/100 kg/cm²(MPa)[Lb/in²] | |
| Tensile yield stress (V=50mm/min) | 干/湿 | 140/100 Mpa |
| Electrical performance | شرایط آزمون | روش آزمون | BASF GERMANY/A3X2G5 |
|---|---|---|---|
| Compared to the Leakage Traceability Index (CTI) | 干/湿 | CTI 525 M | |
| Dielectric constant | 1MHz,干/湿 | 3.7/5 | |
| Dielectric strength | K20/P50,干/湿 | 80/65 KV/mm | |
| Loss angle | 1MHz,干/湿 | 0.02/0.1 | |
| Surface resistivity | ASTM D257/IEC 60093 | 10^13/10^10 Ω | |
| 干/湿 | >10 Ω | ||
| Volume resistivity | 干/湿 | 10 Ω.cm | |
| ASTM D257/IEC 60093 | 10^15/10^12 Ω.cm |
| other | شرایط آزمون | روش آزمون | BASF GERMANY/A3X2G5 |
|---|---|---|---|
| characteristic | 玻纤增强注射级.红磷阻燃剂长期稳定性.具有优异的机械性能和电性能 |
| Physical properties | شرایط آزمون | روش آزمون | BASF GERMANY/A3X2G5 |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.34 | |
| Water absorption rate | ASTM D570/ISO 62 | 5.7-6.3 % |