مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PC LS-4210 TEIJIN JAPAN
PANLITE®
ابزار الکتریکی,لوازم خانگی
سختی بالا,جریان بالا
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
thermal performance | شرایط آزمون | روش آزمون | TEIJIN JAPAN/LS-4210 |
---|---|---|---|
Hot deformation temperature | 0.45 MPa,Unannealed | ISO 75-2/B | 139 °C |
1.8 MPa,Unannealed | ISO 75-2/A | 130 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 0.000070 1/℃ |
MD | ISO 11359-2 | 0.000070 1/℃ | |
Relative Heat Index (RTI) | 冲击机械性能,1.50 mm | UL 746 | 105 °C |
电气性能,1.50 mm | UL 746 | 115 °C | |
强度机械性能,1.50 mm | UL 746 | 105 °C | |
Vicat softening temperature | B50 | ISO 306 | 141 °C |
mechanical properties | شرایط آزمون | روش آزمون | TEIJIN JAPAN/LS-4210 |
---|---|---|---|
Bending modulus | ISO 178 | 2200 Mpa | |
bending strength | ISO 178 | 80 Mpa | |
Tensile modulus | ISO 527-1-2 | 2400 Mpa | |
Tensile strain | Break | ISO 527-2/50 | 110 % |
Yield | ISO 527-2/50 | 6 % | |
tensile strength | Yield | ISO 527-2/50 | 50 Mpa |
Break | ISO 527-2/50 | 50 Mpa |
flame retardant performance | شرایط آزمون | روش آزمون | TEIJIN JAPAN/LS-4210 |
---|---|---|---|
UL flame retardant rating | 1.50 mm | UL 94 | V-2 |
Electrical performance | شرایط آزمون | روش آزمون | TEIJIN JAPAN/LS-4210 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | V | |
Dielectric strength | IEC 60243-1 | 32 KV/mm | |
Dissipation factor | 100 Hz | IEC 60250 | 0.001 |
1 MHz | IEC 60250 | 0.009 | |
Relative permittivity | 100 Hz | IEC 60250 | 3 |
1 MHz | IEC 60250 | 3 | |
Surface resistivity | IEC 60093 | > 1.0E+15 ohms | |
Volume resistivity | IEC 60093 | > 1.0E+15 ohms·cm |
Physical properties | شرایط آزمون | روش آزمون | TEIJIN JAPAN/LS-4210 |
---|---|---|---|
density | ISO 1183 | 1.26 g/cm³ | |
Shrinkage rate | TD:4.0 mm | Internal Method | 0.50 - 0.70 % |
MD:4.0 mm | Internal Method | 0.50 - 0.70 % | |
Water absorption rate | 23℃,24hr | ISO 62 | 0.17 % |
impact performance | شرایط آزمون | روش آزمون | TEIJIN JAPAN/LS-4210 |
---|---|---|---|
Charpy Notched Impact Strength | ISO 179 | 25 kJ/m² | |
Impact strength of simply supported beam without notch | ISO 179 | No Break |