مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

POM C9021 22 CELANESE GERMANY
HOSTAFORM®
لوازم خانگی,لوازم خانگی,زمینه خودرو,ابزار الکتریکی,محصولات دیوار نازک
مقاوم در برابر پوشیدن,عمومی
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
Basic Performance | شرایط آزمون | روش آزمون | CELANESE GERMANY/C9021 22 |
---|---|---|---|
density | ISO 1183 | 1.42 | |
melt mass-flow rate | 8.5cm | ISO 1133 | 12.07 g/10min |
Water absorption rate | 23℃and50%RH | ISO 62 | 0.2 % |
Saturation23℃ | ISO 62 | 0.75 % |
thermal performance | شرایط آزمون | روش آزمون | CELANESE GERMANY/C9021 22 |
---|---|---|---|
Hot deformation temperature | 1.8MPa | ISO 75 part 1/2 | 100 °C |
Linear coefficient of thermal expansion | 23-55℃ Longitudinal | ISO 11359 part 1/2 | 110 µm/m-℃ |
Melting temperature | DSC,10 K/min | ISO 3146 method C1b | 166 °C |
Vicat softening temperature | VST/B/50 | ISO 306 | 150 °C |
mechanical properties | شرایط آزمون | روش آزمون | CELANESE GERMANY/C9021 22 |
---|---|---|---|
Ball Pressure Test | 30sec数值 | ISO 2039 part 1 | 140 Mpa |
Bending modulus | ISO 178 | 2700 Mpa | |
Charpy Notched Impact Strength | 23℃ | ISO 179 1eA | 0.6 J/cm |
低温-30℃ | ISO 179 1eA | 0.6 J/cm | |
elongation | 伸长率 | ISO 527 part 1/2 | 9.0 % |
Elongation at Break | 50mm/min | ISO 527 part 1/2 | 20 % |
Impact strength of simply supported beam without notch | 低温-30℃ | ISO 179 1eU | 12 J/cm |
23℃ | ISO 179 1eU | 12.0 J/cm | |
Tensile creep modulus | 1000 hours | ISO 899 part 1 | 1200 Mpa |
1 hour | ISO 899 part 1 | 2400 Mpa | |
Tensile modulus | 1mm/min | ISO 527 part 1/2 | 2800 Mpa |
tensile strength | 50mm/min,Yield | ISO 527 part 1/2 | 65 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | CELANESE GERMANY/C9021 22 |
---|---|---|---|
Dielectric constant | 1 MHz | IEC 60250 | 4.20 |
低频100 Hz | IEC 60250 | 4.20 | |
Dielectric strength | IEC 60243 part 1 | 35 KV/mm | |
Dissipation factor | 低频100 Hz | IEC 60250 | 0.0025 |
IEC 60250 | 0.008 1 MHz |