مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

COC 8007S JAPAN POLYPLASTIC
TOPAS®  
کاربردهای LCD,کاربردهای نوری
پایدار اندازه,مقاومت در برابر مواد شیمی
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| thermal performance | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/8007S | 
|---|---|---|---|
| Hot deformation temperature | 0.45MPaUnannealed | ISO 75-2/Bf | 75 °C | 
| Vicat softening temperature | ISO 306/B50 | 80 °C | |
| 玻璃转化温度 | ISO 11357-2 | 78 °C | 
| flame retardant performance | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/8007S | 
|---|---|---|---|
| UL flame retardant rating | UL -94 | HB 1.50mm | 
| mechanical properties | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/8007S | 
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 2.6 kJ/m² | 
| Elongation at Break | 23°C | ISO 527-2 | 4.5 % | 
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 20 kJ/m² | 
| Tensile modulus | 23°C | ISO 527-2 | 2600 Mpa | 
| tensile strength | 23°C | ISO 527-2 | 63 Mpa | 
| Electrical performance | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/8007S | 
|---|---|---|---|
| Dielectric constant | 23°C | IEC 60250 | 2.35 1kHz | 
| Dissipation factor | 相对漏电起痕指数 | IEC 60112 | 600 V | 
| Volume resistivity | IEC 60093 | 1E+14 Ω.cm | 
| Physical properties | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/8007S | 
|---|---|---|---|
| melt mass-flow rate | 260℃/2.16Kg | ISO 1133 | 32 cm3/10min | 
| Water absorption rate | (23°C,24hr) | ISO 62 | 0.01 % | 
| optical performance | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/8007S | 
|---|---|---|---|
| Refractive index | ISO 489 | 1.53 °C | |
| Transmittance rate | 2000μm | ISO 13468-2 | 91 % |