مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PC/PET TE5006FH NP LG CHEM KOREA
LUPOX®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| thermal performance | شرایط آزمون | روش آزمون | LG CHEM KOREA/TE5006FH NP |
|---|---|---|---|
| Hot deformation temperature | 1.8 MPa, Unannealed, 6.40 mm, Injection | ASTM D648 | 110 °C |
| Melting temperature | ASTM D3418 | 250 °C | |
| RTI | UL 746 | 120 °C | |
| RTI Elec | UL 746 | 120 °C | |
| RTI Imp | UL 746 | 120 °C |
| mechanical properties | شرایط آزمون | روش آزمون | LG CHEM KOREA/TE5006FH NP |
|---|---|---|---|
| Bending modulus | 23°C, 3.20 mm, Injection | ASTM D790 | 2350 Mpa |
| bending strength | 23°C, 3.20 mm, Injection | ASTM D790 | 90.2 Mpa |
| elongation | Break, 23°C, 3.20 mm, Injection | ASTM D638 | > 100 % |
| tensile strength | Yield, 23°C, 3.20 mm, Injection | ASTM D638 | 60.8 Mpa |
| Electrical performance | شرایط آزمون | روش آزمون | LG CHEM KOREA/TE5006FH NP |
|---|---|---|---|
| Arc resistance | ASTM D495 | PLC 7 | |
| Compared to the anti leakage trace index | UL 746 | PLC 0 | |
| Volume resistivity | 23°C | ASTM D257 | 1.0E+17 ohms·cm |
| Physical properties | شرایط آزمون | روش آزمون | LG CHEM KOREA/TE5006FH NP |
|---|---|---|---|
| melt mass-flow rate | 265°C/2.16 kg | ASTM D1238 | 14 g/10 min |
| Shrinkage rate | 23°C, Injection,Flow | ASTM D955 | 0.60 - 1.0 % |
| Water absorption rate | 24 hr, 23°C | ASTM D570 | 0.10 % |
| flammability | شرایط آزمون | روش آزمون | LG CHEM KOREA/TE5006FH NP |
|---|---|---|---|
| UL flame retardant rating | 3.0 mm | UL 94 | V-0 |
| 1.0 mm | UL 94 | V-0 | |
| 0.75 mm | UL 94 | V-0 | |
| 1.6 mm | UL 94 | V-0 5VB |
| injection | شرایط آزمون | روش آزمون | LG CHEM KOREA/TE5006FH NP |
|---|---|---|---|
| drying temperature | 120 °C | ||
| drying time | 4.0 to 6.0 hr | ||
| Mold temperature | 40 to 80 °C | ||
| Processing (melt) temperature | 255 to 270 °C | ||
| Spray nozzle temperature | 260 to 270 °C | ||
| Suggested maximum moisture content | 0.020 % | ||
| Temperature at the front of the material cylinder | 255 to 265 °C | ||
| Temperature at the rear of the barrel | 245 to 255 °C | ||
| Temperature in the middle of the barrel | 250 to 260 °C |