مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PPS 1140A6 HD9100 PTM NANTONG
DURACON® 
قطعات خودرو,تجهیزات اداری,کاربردهای الکترونیکی,اسکلت کویل,فن گرمایش
سختی بالا,سختی بالا,قدرت بالا,مقاومت بالا,مقاومت در برابر پیری,مقاومت در برابر مواد شیمی,مقاوم در برابر حلال,جریان بالا
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| thermal performance | شرایط آزمون | روش آزمون | PTM NANTONG/1140A6 HD9100 | 
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 270 ℃ | 
| Linear coefficient of thermal expansion | 垂直 | ASTM D696 | 0.00007 cm/cm/℃ | 
| Flow | ASTM D696 | 0.000016 cm/cm/℃ | |
| UL flame retardant rating | UL 94 | V-0 | 
| mechanical properties | شرایط آزمون | روش آزمون | PTM NANTONG/1140A6 HD9100 | 
|---|---|---|---|
| Bending modulus | ASTM D790 | 13700 MPa | |
| bending strength | ASTM D790 | 240 MPa | |
| elongation | Break | ASTM D638 | 1.7 % | 
| Friction coefficient | VS.ltself-Dynamic | ASTM D1894 | 0.44 | 
| Impact strength of cantilever beam gap | ASTM D256 | 92 J/m | |
| Poisson's ratio | ASTM E132 | 0.4 | |
| Suspended wall beam without notch impact strength | ASTM D256 | 353 J/m | |
| tensile strength | ASTM D638 | 186 MPa | 
| Electrical performance | شرایط آزمون | روش آزمون | PTM NANTONG/1140A6 HD9100 | 
|---|---|---|---|
| Arc resistance | ASTM D495 | 120 sec | |
| Compared to the anti leakage trace index | UL 746 | V | |
| Dielectric constant | 1000Hz | ASTM D150 | 4.5 | 
| 1E+6Hz | ASTM D150 | 4.5 | |
| Dielectric strength | 3.00mm | ASTM D149 | 12 kV/mm | 
| Dissipation factor | 1E+6Hz | ASTM D150 | 0.002 | 
| 1000Hz | ASTM D150 | 0.002 | |
| Surface resistivity | ASTM D257 | 8E+16 ohms | |
| Volume resistivity | ASTM D257 | 1E+16 Ohm.cm | 
| Physical properties | شرایط آزمون | روش آزمون | PTM NANTONG/1140A6 HD9100 | 
|---|---|---|---|
| density | ASTM D792 | 1.67 | |
| Rockwell hardness | M-Scale | ASTM D785 | 100 | 
| Water absorption rate | 24hr,23℃ | ASTM D570 | 0.015 % |