مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PC LEV2200KL IDEMITSU JAPAN
TARFLON™
کاربردهای LCD
مقاومت در برابر اشعه ماور,جریان بالا,مقاومت در برابر پیری
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| hardness | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/LEV2200KL |
|---|---|---|---|
| Rockwell hardness | M-Sale | ISO 2039-2 | 50 |
| R-Sale | ISO 2039-2 | 120 |
| Supplementary Information | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/LEV2200KL |
|---|---|---|---|
| ISO Shortcut | >PC< |
| thermal performance | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/LEV2200KL |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 125 °C |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 6.5E-05 cm/cm/°C |
| RTI | 0.36mm | UL 746 | 130 °C |
| RTI Elec | 0.36mm | UL 746 | 130 °C |
| RTI Imp | 0.36mm | UL 746 | 125 °C |
| mechanical properties | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/LEV2200KL |
|---|---|---|---|
| Bending modulus | ISO 178 | 2300 Mpa | |
| bending strength | ISO 178 | 90.0 Mpa | |
| Nominal tensile fracture strain | ISO 527-2 | 95 % | |
| tensile strength | Yield | ISO 527-2 | 65.0 Mpa |
| Electrical performance | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/LEV2200KL |
|---|---|---|---|
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 2 |
| Physical properties | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/LEV2200KL |
|---|---|---|---|
| Melt Volume Flow Rate (MVR) | 300°C/1.2kg | ISO 1133 | 12.0 cm3/10min |
| Shrinkage rate | TD:1.00mm | Internal Method | 0.50-0.70 % |
| MD:1.00mm | Internal Method | 0.50-0.70 % | |
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.23 % |
| flammability | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/LEV2200KL |
|---|---|---|---|
| UL flame retardant rating | 0.40mm | UL 94 | V-2 |
| optical performance | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/LEV2200KL |
|---|---|---|---|
| Refractive index | ASTM D542 | 1.585 | |
| transmissivity | ISO 13468-1 | 90.0 % | |
| turbidity | 3000μm | ASTM D1003 | 0.90 % |