plas

مقایسه مواد

اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگی‌ها
گواهی‌نامه‌ها
PPO GN3101F KA02 LG GUANGZHOU
LUMILOY®
قطعات لوازم خانگی,کاربردهای الکتریکی
ثبات حرارتی,مقاومت در برابر دمای بالا
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

برگه‌های اطلاعات پلاستیک

thermal performanceشرایط آزمونروش آزمونLG GUANGZHOU/GN3101F KA02
Hot deformation temperature0.45 MPa, Unannealed, 4.00 mmISO 75-2/B104 °C
1.8 MPa, Unannealed, 4.00 mmISO 75-2/A94.0 °C
RTIUL 74680.0 °C
RTI ElecUL 74680.0 °C
RTI ImpUL 74680.0 °C
Vicat softening temperatureISO 306/B50109 °C
mechanical propertiesشرایط آزمونروش آزمونLG GUANGZHOU/GN3101F KA02
Bending modulusISO 1783670 Mpa
bending strengthISO 17889.0 Mpa
Tensile strainBreakISO 527-2/552 %
tensile strengthYieldISO 527-2/548.0 Mpa
Physical propertiesشرایط آزمونروش آزمونLG GUANGZHOU/GN3101F KA02
melt mass-flow rate260°C/5.0 kgISO 113311 g/10 min
250°C/2.16 kgISO 11331.8 g/10 min
flammabilityشرایط آزمونروش آزمونLG GUANGZHOU/GN3101F KA02
UL flame retardant rating3.0 mmUL 94V-0
0.75 mmUL 94V-0
1.5 mmUL 94V-0
injectionشرایط آزمونروش آزمونLG GUANGZHOU/GN3101F KA02
Back pressure0.981 to 3.92 Mpa
drying temperature80 to 100 °C
drying time3.0 to 4.0 hr
Mold temperature60 to 80 °C
Processing (melt) temperature260 to 300 °C
Screw speed< 80 rpm
Spray nozzle temperature270 to 290 °C
Suggested maximum moisture content0.020 %
Temperature at the front of the material cylinder290 to 300 °C
Temperature at the rear of the barrel260 to 270 °C
Temperature in the middle of the barrel270 to 290 °C