مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PC 201-8 STYRON US
CALIBRE™
تجهیزات تناسب اندام,ظرف,مواد غذایی غیر خاص,استفاده: ظروف غذایی,محصولات بسته بندی,لوازم ورزشی و بطری های نوزاد
مقاوم در برابر گرما,شفافیت,مقاومت بالا
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| Other performance | شرایط آزمون | روش آزمون | STYRON US/201-8 |
|---|---|---|---|
| Average degree of combustion | ASTM D-635 | 25 mm | |
| Limiting Oxygen Index (LOI) | ASTM D-2863 | 26 % |
| Basic Performance | شرایط آزمون | روش آزمون | STYRON US/201-8 |
|---|---|---|---|
| density | ASTM D-792 | 1200 kg/m | |
| melt mass-flow rate | 300℃/1.2kg | ASTM D-1238 | 8 g/10min |
| Water absorption rate | 24hr,23℃ | ASTM D-570 | 0.15 % |
| 23℃,相对湿度50%,Equilibrium | ASTM D-570 | 0.32 % |
| thermal performance | شرایط آزمون | روش آزمون | STYRON US/201-8 |
|---|---|---|---|
| Ball indentation temperature | IEC 598-1 | >125 °C | |
| Glow wire combustion index (GWFI) | 2mm | IEC 695-2-1 | 850 °C |
| Hot deformation temperature | Annealed@1.82MPa(4mm) | ASTM D-648 | 142 °C |
| Unannealed@1.82MPa(4mm) | ASTM D-648 | 129 °C | |
| Annealed@0.45MPa(4mm) | ASTM D-648 | 145 °C | |
| Shrinkage rate | -40℃~82℃ | ASTM D-696 | 68×10 mm/mm/℃ |
| Vicat softening temperature | ASTM D-1525 | 149 °C |
| mechanical properties | شرایط آزمون | روش آزمون | STYRON US/201-8 |
|---|---|---|---|
| Bending modulus | ASTM D-790 | 2410 Mpa | |
| bending strength | ASTM D-790 | 96 Mpa | |
| Dart impact | 总能量@23℃ | ASTM D-3763 | 89 J |
| elongation | Yield点 | ASTM D-638 | 6 % |
| Break点 | ASTM D-638 | 150 % | |
| Impact strength of cantilever beam gap | 23℃ | ASTM D-256 | 未破裂 |
| 23℃ | ASTM D-256 | 900 J/m | |
| Rockwell hardness | ASTM D-785 | 73 M标度 | |
| Tensile modulus | ASTM D-638 | 2410 Mpa | |
| tensile strength | Yield点 | ASTM D-638 | 60 Mpa |
| Break点 | ASTM D-638 | 72 Mpa |
| Electrical performance | شرایط آزمون | روش آزمون | STYRON US/201-8 |
|---|---|---|---|
| Compared to the Leakage Traceability Index (CTI) | 2mm | IEC 112 | 250 V |
| Dielectric strength | 60Hz | ASTM D-149 | 17 KV/mm |
| Dissipation factor | 60Hz | ASTM D-150 | 0.001 |
| Volume resistivity | 23℃,干 | ASTM D-257 | 2.0×10 Ω.cm |
| Physical properties | شرایط آزمون | روش آزمون | STYRON US/201-8 |
|---|---|---|---|
| Refractive index | ASTM D-542 | 1.586 | |
| Shrinkage rate | ASTM D-955 | 0.005-0.007 mm/mm | |
| Transmittance rate | ASTM D-1003 | 89 % | |
| turbidity | ASTM D-1003 | 0.7-1.5 % |