مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

TPU 95AU(H)T COVESTRO SHANGHAI
Texin®
پوشش کابل,قطعات مهندسی,لوله,پروفایل,کاربردهای هیدرولیکی
مقاوم در برابر آب,انعطاف پذیری کم
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| hardness | شرایط آزمون | روش آزمون | COVESTRO SHANGHAI/95AU(H)T |
|---|---|---|---|
| Shore hardness | Shore A | ASTM D2240 | 95 |
| thermal performance | شرایط آزمون | روش آزمون | COVESTRO SHANGHAI/95AU(H)T |
|---|---|---|---|
| Brittle temperature | ASTM D746 | -53.9 °C |
| mechanical properties | شرایط آزمون | روش آزمون | COVESTRO SHANGHAI/95AU(H)T |
|---|---|---|---|
| elongation | Break | ASTM D638 | 500 % |
| tensile strength | Yield | ASTM D638 | 6.55 Mpa |
| Physical properties | شرایط آزمون | روش آزمون | COVESTRO SHANGHAI/95AU(H)T |
|---|---|---|---|
| Shrinkage rate | 3.20 mm,Flow | ASTM D955 | 1.1 - 1.4 % |
| flammability | شرایط آزمون | روش آزمون | COVESTRO SHANGHAI/95AU(H)T |
|---|---|---|---|
| UL flame retardant rating | 1.0 mm | UL 94 | HB |
| injection | شرایط آزمون | روش آزمون | COVESTRO SHANGHAI/95AU(H)T |
|---|---|---|---|
| Back pressure | 0.172 to 0.689 Mpa | ||
| drying temperature | 82 °C | ||
| drying time | 3.0 hr | ||
| Exhaust hole depth | 0.013 to 0.038 mm | ||
| Mold temperature | 32 to 71 °C | ||
| Processing (melt) temperature | 193 to 204 °C | ||
| Screw speed | 25 to 75 rpm | ||
| Spray nozzle temperature | 182 to 204 °C | ||
| Suggested maximum moisture content | 0.080 % | ||
| Temperature at the front of the material cylinder | 182 to 204 °C | ||
| Temperature at the rear of the barrel | 160 to 182 °C | ||
| Temperature in the middle of the barrel | 171 to 193 °C |