مقایسه مواد

اطلاعات محصول

نام محصول

نام برند

کاربردها

ویژگی‌ها

گواهی‌نامه‌ها

PBT 2002 JAPAN POLYPLASTIC

DURANEX®

زمینه برق,حوزه الکترونیک

عقب نشینی,انعطاف پذیری خوب,تقویت فیبر شیشه ای,مقاومت در برابر اصطکاک

برگه‌های اطلاعات پلاستیک

hardness	شرایط آزمون	روش آزمون	JAPAN POLYPLASTIC/2002
Rockwell hardness	M-Sale	ISO 2039-2	78
Rockwell hardness		M-Scale	ISO 2039-2	85

Supplementary Information	شرایط آزمون	روش آزمون	JAPAN POLYPLASTIC/2002
ColourNumber			EF2001/ED3002

thermal performance	شرایط آزمون	روش آزمون	JAPAN POLYPLASTIC/2002
0.45MPa, unannealed		ISO 75-2/B	150 °C
0.45MPa, unannealed			ASTM D648	160 °C
1.8MPa, unannealed		ASTMD648	55.0 °C
Glass transition temperature		ISO 11357-2	60.0 °C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	80.0 °C
		1.82Mpa	ASTM D-648	70 °C
		HDT	ASTM D648/ISO 75	70 ℃（℉）
		1.8Mpa	ISO 75-1/-2	80 °C
Linear coefficient of thermal expansion	MD：23to55°C	Internal Method	9E-05 cm/cm/°C
		TD：23to55°C	Internal Method	9E-05 cm/cm/°C
		TD	ISO 11359-2	1.4E-04 cm/cm/°C
		MD	ISO 11359-2	1.1E-04 cm/cm/°C
Melting temperature		ISO 11357-3	225 °C
UL flame retardant rating		UL 94	HB
Vicat softening temperature		ISO 306/B50	190 °C

mechanical properties	شرایط آزمون	روش آزمون	JAPAN POLYPLASTIC/2002
121°C	121℃	ASTM D638	296 Mpa
23°C		ASTM D638	3170 Mpa
-40°C	-40℃	ASTM D638	3100 Mpa
50% strain	50%Strain	ISO 527-2/1A/50	30.0 Mpa
80°C	80℃	ASTM D638	469 Mpa
Bending modulus		ASTM D-790	2540 Mpa
			ISO 178	3100 Mpa
		23°C	ISO 178	2500 Mpa
			ASTM D790/ISO 178	2540 kg/cm²(MPa)[Lb/in²]
bending strength		ISO 178	95 Mpa
			ASTM D790/ISO 178	85 kg/cm²(MPa)[Lb/in²]
		23°C	ISO 178	80.0 Mpa
			ASTM D-790	85 Mpa
Charpy Notched Impact Strength		ISO 179/1eA	3.2 kJ/m²
crack		ISO 527-2/1A/50	220 %
crack			ISO 527-2/1A/50	35.0 Mpa
elongation		ASTM D-638	>200 %
Elongation at Break		ASTM D638/ISO 527	>200 %
Fracture, 23 ° C		ASTM D638	200 %
Impact strength of cantilever beam gap		ASTM D256/ISO 179	34 kg·cm/cm(J/M)ft·lb/in
Impact strength of cantilever beam gap			ASTM D-256	34 J/m
Nominal tensile fracture strain		ISO 527-2/1A/50	>50 %
Nominal tensile fracture strain			ISO 527-2	12 %
Surrender, 23 ° C		ASTM D638	55.8 Mpa
Surrender, 23 ° C			ASTM D638	3.2 %
Surrender- 40°C		ASTM D638	7.2 %
Surrender- 40°C			ASTM D638	101 Mpa
tensile strength		ISO 527-2	57.0 Mpa
			ASTM D-638	51 Mpa
			ISO 527-1/-2	57 Mpa
			ASTM D638/ISO 527	51 kg/cm²(MPa)[Lb/in²]
yield		ISO 527-2/1A/50	4.0 %
yield			ISO 527-2/1A/50	60.0 Mpa
Yield, 0 ° C	Yield,0°C	ASTM D638	75.8 Mpa
Yield, 0 ° C		Yield,0°C	ASTM D638	4.4 %
Yield, 121 ° C		ASTM D638	17.9 Mpa
Yield, 121 ° C			ASTM D638	23 %
Yield, 80 ° C		ASTM D638	24.8 Mpa
Yield, 80 ° C			ASTM D638	17 %

Electrical performance	شرایط آزمون	روش آزمون	JAPAN POLYPLASTIC/2002
--1		ASTM D149	17 KV/mm
100Hz	100Hz	IEC 60250	4.00
1MHz	1MHz	IEC 60250	3.50
1MHz		1MHz	ASTM D150	3.20
Compared to the anti leakage trace index		IEC 60112	PLC 0
Dielectric strength	3.00mm	IEC 60243-1	17 KV/mm
Dissipation factor	1MHz	IEC 60250	0.022
Dissipation factor		100Hz	IEC 60250	1.4E-03
Surface resistivity		IEC 60093	1E+15 ohms

Physical properties	شرایط آزمون	روش آزمون	JAPAN POLYPLASTIC/2002
	Flow	ISO 294-4	1.8to2.0 %
density		ASTM D792/ISO 1183	792
flow		ASTM D955	1.8to2.0 %
melt mass-flow rate		ASTM D1238	20 g/10min
Melt Volume Flow Rate (MVR)	250°C/2.16kg	ISO 1133	18.0 cm3/10min
Vertical flow direction		ISO 294-4	1.8to2.0 %
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.19 %
Water absorption rate		23°C,24hr	ISO 62	0.20 %

impact performance	شرایط آزمون	روش آزمون	JAPAN POLYPLASTIC/2002
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	190 kJ/m²
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	无断裂

flammability	شرایط آزمون	روش آزمون	JAPAN POLYPLASTIC/2002
Extreme Oxygen Index		ISO 4589-2	22 %
UL flame retardant rating	0.710mm	UL 94	HB
UL flame retardant rating			UL 94	HB

تماس با ما

دریافت اپلیکیشن

Top