مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

LCP E5006L-BK SUMITOMO JAPAN
SUMIKASUPER®
ذخیره سازی داده های نوری,محور
مقاوم در برابر گرما,افزایش,تقویت فیبر شیشه ای,شرکت CLTE,بسته بندی: فیبر شیشه ای ط
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
hardness | شرایط آزمون | روش آزمون | SUMITOMO JAPAN/E5006L-BK |
---|---|---|---|
Rockwell hardness | R-Scale | ASTM D785 | 90 |
Supplementary Information | شرایط آزمون | روش آزمون | SUMITOMO JAPAN/E5006L-BK |
---|---|---|---|
Solder resistance | Internal Method | 350 °C |
thermal performance | شرایط آزمون | روش آزمون | SUMITOMO JAPAN/E5006L-BK |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 355 °C |
Linear coefficient of thermal expansion | TD:150°C | Internal Method | 7.3E-05 cm/cm/°C |
MD:150°C | Internal Method | 1.7E-05 cm/cm/°C | |
thermal conductivity | JISR2618 | 0.54 W/m/K |
mechanical properties | شرایط آزمون | روش آزمون | SUMITOMO JAPAN/E5006L-BK |
---|---|---|---|
Bending modulus | 23°C | ASTM D790 | 14200 Mpa |
bending strength | Yield,23°C | ASTM D790 | 152 Mpa |
elongation | Break | ASTM D638 | 4.5 % |
Poisson's ratio | 7.58 0.48 | ||
tensile strength | Yield | ASTM D638 | 151 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | SUMITOMO JAPAN/E5006L-BK |
---|---|---|---|
Dielectric constant | 1.00GHz | ASTM D150 | 3.40 |
1MHz | ASTM D150 | 3.70 | |
Dissipation factor | 1MHz | ASTM D150 | 0.022 |
1.00GHz | ASTM D150 | 4E-03 | |
Volume resistivity | ASTM D257 | 1E+15 ohms·cm |
Physical properties | شرایط آزمون | روش آزمون | SUMITOMO JAPAN/E5006L-BK |
---|---|---|---|
Shrinkage rate | MD | Internal Method | 0.020 % |
TD | Internal Method | 0.86 % | |
Water absorption rate | Saturation | ASTM D570 | 0.020 % |
impact performance | شرایط آزمون | روش آزمون | SUMITOMO JAPAN/E5006L-BK |
---|---|---|---|
Suspended wall beam without notch impact strength | 6.40mm | ASTM D256 | 380 J/m |
flammability | شرایط آزمون | روش آزمون | SUMITOMO JAPAN/E5006L-BK |
---|---|---|---|
UL flame retardant rating | 0.30mm | UL 94 | V-0 |