مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PC URC2501 IDEMITSU JAPAN
TARFLON™
پخش کننده روشنایی
عقب نشینی,بازتاب بالا
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
Other performance | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/URC2501 |
---|---|---|---|
Light reflectance | D65 type,10 | 97.5 | |
Melt Volume Flow Rate (MVR) | ISO 1133 | 32 cm3/10min | |
Transmittance rate | 1mmt | 0.1 |
Supplementary Information | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/URC2501 |
---|---|---|---|
ISO Shortcut | >PC-MD20< |
thermal performance | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/URC2501 |
---|---|---|---|
Combustibility (rate) | UL 94 | V-0/1.0mm | |
Hot deformation temperature | 0.46MPa | ISO 75-1-2 | 136 °C |
0.45MPa,Unannealed | ISO 75-2/B | 136 °C | |
1.8MPa,Unannealed | ISO 75-2/A | 125 °C | |
1.8MPa | ISO 75-1-2 | 125 °C | |
Linear coefficient of thermal expansion | MD | ISO 11359-2 | 6.5E-05 cm/cm/°C |
RTI Elec | UL 746 | 80.0 °C | |
RTI Imp | UL 746 | 80.0 °C | |
RTI Str | UL 746 | 80.0 °C | |
UL flame retardant rating | 1.0mm | UL 94 | V-0 |
mechanical properties | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/URC2501 |
---|---|---|---|
Bending modulus | ISO 178 | 2200 Mpa | |
ASTM D790/ISO 178 | 2.2(GPa) kg/cm²(MPa)[Lb/in²] | ||
bending strength | ISO 178 | 80.0 Mpa | |
ASTM D790/ISO 178 | 80 kg/cm²(MPa)[Lb/in²] | ||
elongation | Break | ISO 527-1 | 70 % |
Elongation at Break | ASTM D638/ISO 527 | tB 70 % | |
Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 30 kg·cm/cm(J/M)ft·lb/in | |
ISO 176 | 30 k/Jm2 | ||
Nominal tensile fracture strain | ISO 527-2 | 70 % | |
Tensile modulus | ISO 527-1 | 2100 Mpa | |
tensile strength | ASTM D638/ISO 527 | 50 kg/cm²(MPa)[Lb/in²] | |
Yield | ISO 527-2 | 50.0 Mpa | |
Tensile stress | ISO 527-1 | 50 Mpa |
Physical properties | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/URC2501 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.38 | |
melt mass-flow rate | ASTM D1238/ISO 1133 | 35 cm3/10min(300℃/1.2kg ) g/10min | |
Melt Volume Flow Rate (MVR) | 300°C/1.2kg | ISO 1133 | 35.0 cm3/10min |
Shrinkage rate | MD:2.00mm | Internal Method | 0.50-0.60 % |
TD:2.00mm | Internal Method | 0.50-0.60 % |
flammability | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/URC2501 |
---|---|---|---|
UL flame retardant rating | 1.0mm | UL 94 | V-0 |
optical performance | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/URC2501 |
---|---|---|---|
Huangdu Index | 9.0 YI | ||
Refractive index | D65 type,10 | ISO 13468-1 | 97.5 |
Transmittance rate | 1000μm | ISO 13468-1 | 0.1 % |