مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

ABS/PA NM-12 INEOS STYRO KOREA
Terblend®N
لوازم روزانه خانوادگی,دستت رو بگير,کالاهای خانگی
سختی بالا,مقاومت متوسط,آسان برای پردازش
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
hardness | شرایط آزمون | روش آزمون | INEOS STYRO KOREA/NM-12 |
---|---|---|---|
Ball Pressure Test | ISO 2039-1 | 102 Mpa |
thermal performance | شرایط آزمون | روش آزمون | INEOS STYRO KOREA/NM-12 |
---|---|---|---|
0.45MPa, annealed | ISO 75-2/B | 88.0 °C | |
1.8MPa, annealed | ISO 75-2/A | 66.0 °C | |
Linear coefficient of thermal expansion | MD | ISO 11359-2 | 9E-05 cm/cm/°C |
film | شرایط آزمون | روش آزمون | INEOS STYRO KOREA/NM-12 |
---|---|---|---|
elongation | Break | 20 % |
mechanical properties | شرایط آزمون | روش آزمون | INEOS STYRO KOREA/NM-12 |
---|---|---|---|
Bending modulus | ISO 178 | 2200 Mpa | |
bending strength | ISO 178 | 74.0 Mpa | |
Tensile modulus | ISO 527-2 | 2200 Mpa | |
Tensile strain | Yield,23°C | ISO 527-2 | 3.2 % |
tensile strength | Yield,23°C | ISO 527-2 | 50.0 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | INEOS STYRO KOREA/NM-12 |
---|---|---|---|
Dissipation factor | 1MHz | IEC 60250 | 0.015 |
Relative permittivity | 1MHz | IEC 60250 | 2.90 |
Surface resistivity | IEC 60093 | 1E+14 ohms | |
Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm |
Physical properties | شرایط آزمون | روش آزمون | INEOS STYRO KOREA/NM-12 |
---|---|---|---|
Melt Volume Flow Rate (MVR) | 240°C/10.0kg | ISO 1133 | 34.0 cm3/10min |
Shrinkage rate | ISO 294-4 | 0.80 % | |
Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 1.1 % |