plas

مقایسه مواد

اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگی‌ها
گواهی‌نامه‌ها
PPO EM6101-8846 SABIC INNOVATIVE US
NORYL™ 
محافظت الکترومغناطیسی
هدایت برق,تقویت فیبر شیشه ای
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

برگه‌های اطلاعات پلاستیک

thermal performanceشرایط آزمونروش آزمونSABIC INNOVATIVE US/EM6101-8846
Hot deformation temperature0.45 MPa, Unannealed, 6.40 mmASTM D648123 °C
1.8 MPa, Unannealed, 6.40 mmASTM D648121 °C
Linear coefficient of thermal expansion0 to 100°C,FlowASTM E8319.4E-5 cm/cm/°C
mechanical propertiesشرایط آزمونروش آزمونSABIC INNOVATIVE US/EM6101-8846
Bending modulus100 mm SpanASTM D7902300 Mpa
bending strengthYield, 100 mm SpanASTM D79081.0 Mpa
elongationBreakASTM D63850 %
tensile strengthYieldASTM D63853.0 Mpa
Physical propertiesشرایط آزمونروش آزمونSABIC INNOVATIVE US/EM6101-8846
Shrinkage rate3.20 mm,FlowInternal Method0.50 - 0.70 %
Water absorption rate24 hrASTM D5700.20 %
impact performanceشرایط آزمونروش آزمونSABIC INNOVATIVE US/EM6101-8846
Dart impact-30°C, Energy at PeakASTM D376325.0 J
23°C, Energy at PeakASTM D376353.0 J
injectionشرایط آزمونروش آزمونSABIC INNOVATIVE US/EM6101-8846
Back pressure0.300 to 0.700 Mpa
drying temperature95 to 105 °C
drying time3.0 to 4.0 hr
Exhaust hole depth0.038 to 0.051 mm
Mold temperature65 to 95 °C
Processing (melt) temperature265 to 295 °C
Screw speed20 to 100 rpm
Spray nozzle temperature265 to 295 °C
Suggested injection volume30 to 70 %
Suggested maximum moisture content0.020 %
Temperature at the front of the material cylinder255 to 295 °C
Temperature at the rear of the barrel230 to 280 °C
Temperature in the middle of the barrel245 to 290 °C