مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PC DMH3000S SAMYANG KOREA
TRIREX®
--
عقب نشینی
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
hardness | شرایط آزمون | روش آزمون | SAMYANG KOREA/DMH3000S |
---|---|---|---|
Rockwell hardness | ASTM D785 | 120 R |
thermal performance | شرایط آزمون | روش آزمون | SAMYANG KOREA/DMH3000S |
---|---|---|---|
Hot deformation temperature | 1.80MPaUnannealed | ASTM D648 | 98 °C |
Linear coefficient of thermal expansion | MD | ASTM D696 | 6E-05 cm/cm/°C |
mechanical properties | شرایط آزمون | روش آزمون | SAMYANG KOREA/DMH3000S |
---|---|---|---|
Bending modulus | 23°C | ASTM D790 | 2450 Mpa |
bending strength | 23°C | ASTM D790 | 98.1 Mpa |
Elongation at Break | 23°C | ASTM D638 | 100 % |
Impact strength of cantilever beam gap | 23°C | ASTM D256 | 49 J/m |
tensile strength | 23°C | ASTM D638 | 73.5 Mpa |
flame retardant performance | شرایط آزمون | روش آزمون | SAMYANG KOREA/DMH3000S |
---|---|---|---|
UL flame retardant rating | UL -94 | V-0.5VB 2.50mm | |
UL -94 | V-0 1.50mm | ||
UL -94 | V-0.5VB 3.00mm |
Electrical performance | شرایط آزمون | روش آزمون | SAMYANG KOREA/DMH3000S |
---|---|---|---|
Dielectric constant | 23°C | ASTM D150 | 2.90 1MHz |
Dielectric strength | ASTM D149 | 30 KV/mm | |
Dissipation factor | 耐电弧性 | ASTM D495 | 120 S |
23°C | ASTM D150 | 9E-03 1MHz | |
Volume resistivity | ASTM D257 | 4E+16 Ω.cm |
Physical properties | شرایط آزمون | روش آزمون | SAMYANG KOREA/DMH3000S |
---|---|---|---|
density | ASTM D792 | 1.20 g/cm³ | |
melt mass-flow rate | 300℃/1.2Kg | ASTM D1238 | 30 g/10min |
Shrinkage rate | MD2.0mm | ASTM D995 | 0.60 % |
Water absorption rate | (23°C,24hr) | ASTM D570 | 0.15 % |