مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PC DF-1002 BK8-229 SABIC INNOVATIVE US
LNP™ THERMOCOMP™  
کاربردهای الکترونیکی,نمایشگر الکترونیکی,لوازم مراقبت های پزشکی
آسان قالب گیری,آسان جدا کردن,بسته بندی: مواد تقویت کنن,10٪ بسته بندی بر اساس وزن
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| thermal performance | شرایط آزمون | روش آزمون | SABIC INNOVATIVE US/DF-1002 BK8-229 | 
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed,3.20mm | ASTM D648 | 141 °C | 
| 0.45MPa,Unannealed,64.0mmSpan | ISO 75-2/Bf | 54.9 °C | |
| 0.45MPa,Unannealed,3.20mm | ASTM D648 | 146 °C | |
| Linear coefficient of thermal expansion | TD:-30to30°C | ASTM D696 | 5.3E-05 cm/cm/°C | 
| MD:-30to30°C | ASTM D696 | 4.6E-05 cm/cm/°C | 
| mechanical properties | شرایط آزمون | روش آزمون | SABIC INNOVATIVE US/DF-1002 BK8-229 | 
|---|---|---|---|
| Bending modulus | 50.0mmSpan | ASTM D790 | 4110 Mpa | 
| ISO 178 | 3960 Mpa | ||
| bending strength | Yield,50.0mmSpan | ASTM D790 | 138 Mpa | 
| elongation | Break | ASTM D638 | 5.6 % | 
| Yield | ASTM D638 | 3.9 % | |
| Tensile modulus | ASTM D638 | 4250 Mpa | |
| ISO 527-2/1 | 4170 Mpa | ||
| Tensile strain | Break | ISO 527-2/5 | 5.7 % | 
| Yield | ISO 527-2/5 | 3.8 % | |
| tensile strength | Break | ISO 527-2/5 | 74.0 Mpa | 
| Yield | ASTM D638 | 81.0 Mpa | |
| Yield | ISO 527-2/5 | 80.0 Mpa | |
| Break | ASTM D638 | 75.0 Mpa | 
| Physical properties | شرایط آزمون | روش آزمون | SABIC INNOVATIVE US/DF-1002 BK8-229 | 
|---|---|---|---|
| Shrinkage rate | TD:24hr | ASTM D955 | 0.60-0.80 % | 
| MD:24hr | ASTM D955 | 0.40-0.60 % | |
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.20 % | 
| 24hr,50%RH | ASTM D570 | 0.14 % | 
| impact performance | شرایط آزمون | روش آزمون | SABIC INNOVATIVE US/DF-1002 BK8-229 | 
|---|---|---|---|
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 18.4 J | 
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 8.7 kJ/m² | 
| Multi axis Instrumented Impact Energy | ISO 6603-2 | 10.5 J | |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 55 kJ/m² |