plas
ورود

مقایسه مواد

اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگی‌ها
گواهی‌نامه‌ها
PC PC-ABSCOM™ B300 Polymer Compounders Limited
--
Shell, safety equipment, automotive interior parts
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

برگه‌های اطلاعات پلاستیک

thermal performanceشرایط آزمونروش آزمونPolymer Compounders Limited/PC-ABSCOM™ B300
Hot deformation temperature1.8MPa,UnannealedISO 75-2/Ae110 °C
0.45MPa,UnannealedISO 75-2/B131 °C
Linear coefficient of thermal expansionMDISO 11359-29.5E-04 cm/cm/°C
Vicat softening temperatureISO 306/B50130 °C
mechanical propertiesشرایط آزمونروش آزمونPolymer Compounders Limited/PC-ABSCOM™ B300
Bending modulus23°CISO 1782200 MPa
bending strengthISO 17866.0 MPa
Tensile modulusISO 527-2/12100 MPa
Tensile strainYield,-20°CISO 527-26.3 %
BreakISO 527-235 %
YieldISO 527-2/504.3 %
tensile strengthYield,80°CISO 527-220.0 MPa
YieldISO 527-2/5050.0 MPa
Yield,-40°CISO 527-263.0 MPa
Physical propertiesشرایط آزمونروش آزمونPolymer Compounders Limited/PC-ABSCOM™ B300
densityISO 11831.15 g/cm³
melt mass-flow rate260°C/5.0kgISO 113318 g/10min
Shrinkage rateISO 294-40.40to0.70 %
Water absorption rateEquilibrium,23°C,50%RHISO 620.22 %
Saturation,23°CISO 620.70 %
impact performanceشرایط آزمونروش آزمونPolymer Compounders Limited/PC-ABSCOM™ B300
Charpy Notched Impact Strength23°CISO 17947 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/1A48 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU无断裂
flammabilityشرایط آزمونروش آزمونPolymer Compounders Limited/PC-ABSCOM™ B300
UL flame retardant rating0.8mmUL 94HB
1.5mmUL 94HB