مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PC GN-3410 TEIJIN JAPAN
PANLITE®
کاربردهای صنعتی,برنامه های دوربین,قطعات الکتریکی
عقب نشینی
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
machinability | شرایط آزمون | روش آزمون | TEIJIN JAPAN/GN-3410 |
---|---|---|---|
Shrinkage rate | Across Flow | ASTM D-955 | 0.4-0.6 % |
Flow | ASTM D-955 | 0.3-0.5 % |
Basic Performance | شرایط آزمون | روش آزمون | TEIJIN JAPAN/GN-3410 |
---|---|---|---|
Water absorption rate | 24hr in 23℃ | ASTM D-570 | 0.16 % |
thermal performance | شرایط آزمون | روش آزمون | TEIJIN JAPAN/GN-3410 |
---|---|---|---|
Hot deformation temperature | 负荷1.813MPa(18.6kgf/cm | JIS K-7207 | 146 °C |
负荷0.451MPa(4.6kgf/cm | JIS K-7207 | 149 °C | |
Linear coefficient of thermal expansion | Across Flow | ASTM D-696 | 6.7 |
Flow | ASTM D-696 | 4.0 |
mechanical properties | شرایط آزمون | روش آزمون | TEIJIN JAPAN/GN-3410 |
---|---|---|---|
Bending modulus | ASTM D-790 | 3530(36000) MPa(Kgf/cm | |
bending strength | ASTM D-790 | 127(1300) MPa(Kgf/cm | |
compressive strength | ASTM D-695 | 105(1070) MPa(Kgf/cm | |
Dielectric strength | 快速加压值厚度1.6mm | ASTM D-149 | 30 KV/mm |
elongation | Break | ASTM D-638 | 4.5 % |
Impact strength of cantilever beam gap | 艾氏、带Notched厚度6.4mm | ASTM D-256 | 69(7) J/m(kgf·cm/cm) |
艾氏、带Notched厚度3.2mm | ASTM D-256 | 69(7) J/m(kgf·cm/cm) | |
Rockwell hardness | ASTM D-785 | 86 M标度 | |
Tensile modulus | ASTM D-638 | 3920(40000) MPa(Kgf/cm | |
tensile strength | ASTM D-638 | 82(840) MPa(Kgf/cm |
Electrical performance | شرایط آزمون | روش آزمون | TEIJIN JAPAN/GN-3410 |
---|---|---|---|
Arc resistance | ASTM D-495 | 100 sec | |
Conductive Track Resistance (CTI) | IEC 112 | 185 V | |
Dielectric constant | 60Hz | ASTM D-150 | 3.16 |
10 | ASTM D-150 | 3.07 | |
Dielectric loss | 10,Tangent | ASTM D-150 | 0.0025 |
60Hz,Tangent | ASTM D-150 | 0.0008 | |
Temperature index | 电学式,厚度1.47mm | UL 746B | 130 °C |
冲击式,厚度1.47mm | UL 746B | 120 °C | |
非冲击式,厚度1.47mm | UL 746B | 130 °C | |
Volume resistivity | ASTM D-257 | 1×10 Ω.cm |