مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PA12 L-GF15 EVONIK GERMANY
VESTAMID®
پوشش کابل,کاربردهای خودرو
مقاومت در برابر ضربه دمای,مقاومت در برابر شکستن فشا,مقاومت در برابر خستگی
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| Supplementary Information | شرایط آزمون | روش آزمون | EVONIK GERMANY/L-GF15 |
|---|---|---|---|
| Electrolytic corrosion | IEC 60426 | A1 | |
| ISO Shortcut | ISO 1874 | PA12.MHR.16-050.GF15 |
| thermal performance | شرایط آزمون | روش آزمون | EVONIK GERMANY/L-GF15 |
|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 175 °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 160 °C | |
| Linear coefficient of thermal expansion | MD:23to55°C | ISO 11359-2 | 8E-05 cm/cm/°C |
| Melting temperature | ISO 11357-3 | 178 °C | |
| Vicat softening temperature | -- | ISO 306/B | 170 °C |
| -- | ISO 306/A | 175 °C |
| mechanical properties | شرایط آزمون | روش آزمون | EVONIK GERMANY/L-GF15 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 3900 Mpa | |
| Tensile strain | Break | ISO 527-2 | 6.0 % |
| tensile strength | Break | ISO 527-2 | 95.0 Mpa |
| Electrical performance | شرایط آزمون | روش آزمون | EVONIK GERMANY/L-GF15 |
|---|---|---|---|
| Compared to the anti leakage trace index | SolutionA3 | IEC 60112 | V |
| -- | IEC 60112 | V | |
| Dielectric strength | IEC 60243-1 | 44 KV/mm | |
| Dissipation factor | 23°C,100Hz | IEC 60250 | 0.038 |
| 23°C,1MHz | IEC 60250 | 0.026 | |
| Relative permittivity | 23°C,1MHz | IEC 60250 | 3.40 |
| 23°C,100Hz | IEC 60250 | 4.00 | |
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm |
| Physical properties | شرایط آزمون | روش آزمون | EVONIK GERMANY/L-GF15 |
|---|---|---|---|
| density | 23°C | ISO 1183 | 1.12 g/cm³ |
| Shrinkage rate | MD | ISO 294-4 | 0.35 % |
| TD | ISO 294-4 | 0.65 % | |
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.60 % |
| Saturation,23°C | ISO 62 | 1.3 % |
| impact performance | شرایط آزمون | روش آزمون | EVONIK GERMANY/L-GF15 |
|---|---|---|---|
| Charpy Notched Impact Strength | -30°C,Complete Break | ISO 179/1eA | 11 kJ/m² |
| 23°C,Complete Break | ISO 179/1eA | 17 kJ/m² | |
| Impact strength of simply supported beam without notch | -30°C,Complete Break | ISO 179/1eU | 80 kJ/m² |
| 23°C,Complete Break | ISO 179/1eU | 75 kJ/m² |
| flammability | شرایط آزمون | روش آزمون | EVONIK GERMANY/L-GF15 |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | V-2 |
| 1.6mm | UL 94 | HB |