مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PBT 6370B JAPAN POLYPLASTIC
DURANEX®
کاربردهای خودرو
عقب نشینی,انحراف پایین
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| hardness | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/6370B |
|---|---|---|---|
| Rockwell hardness | M-Scale | ISO 2039-2 | 65 |
| Supplementary Information | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/6370B |
|---|---|---|---|
| ColourNumber | EF2001/ED3002 |
| thermal performance | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/6370B |
|---|---|---|---|
| Combustibility (rate) | UL 94 | V-0 | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 90.0 °C |
| Linear coefficient of thermal expansion | MD:23to55°C | Internal Method | 7E-05 cm/cm/°C |
| ASTM D696/ISO 11359 | 7 mm/mm.℃ | ||
| TD:23to55°C | Internal Method | 7E-05 cm/cm/°C |
| mechanical properties | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/6370B |
|---|---|---|---|
| Bending modulus | ISO 178 | 4360 Mpa | |
| ASTM D790/ISO 178 | 4360 kg/cm²(MPa)[Lb/in²] | ||
| bending strength | ASTM D790/ISO 178 | 84 kg/cm²(MPa)[Lb/in²] | |
| ISO 178 | 84.0 Mpa | ||
| Elongation at Break | ASTM D638/ISO 527 | 1.8 % | |
| Tensile strain | Break | ISO 527-2 | 1.8 % |
| tensile strength | ASTM D638/ISO 527 | 47 kg/cm²(MPa)[Lb/in²] | |
| ISO 527-2 | 47.0 Mpa |
| Electrical performance | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/6370B |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 60112 | PLC 3 | |
| Dielectric strength | 3.00mm | IEC 60243-1 | 15 KV/mm |
| Volume resistivity | IEC 60093 | 2E+15 ohms·cm | |
| ASTM D257/IEC 60093 | 2.0 x 10^15 Ω.cm |
| Physical properties | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/6370B |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.67 | |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.10 % |
| flammability | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/6370B |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |