مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

POM C52021 CELANESE GERMANY
HOSTAFORM®
تجهیزات تناسب اندام,کاربردهای الکتریکی
مقاومت در برابر مواد شیمی,آنتی اکسیدان,مقاوم در برابر آب
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
Basic Performance | شرایط آزمون | روش آزمون | CELANESE GERMANY/C52021 |
---|---|---|---|
density | ISO 1183 | 1.41 | |
melt mass-flow rate | 39cm | ISO 1133 | 54.99 g/10min |
Water absorption rate | 23℃ | ISO 62 | 0.65 % |
23℃and50%RH | ISO 62 | 0.2 % |
thermal performance | شرایط آزمون | روش آزمون | CELANESE GERMANY/C52021 |
---|---|---|---|
Hot deformation temperature | 1.8MPa | ISO 75 part 1/2 | 106 °C |
Linear coefficient of thermal expansion | 23-55℃ Longitudinal | ISO 11359 part 1/2 | 110 µm/m-℃ |
Melting temperature | DSC,10 K/min | ISO 3146 method C1b | 166 °C |
Vicat softening temperature | VST/B/50 | ISO 306 | 151 °C |
mechanical properties | شرایط آزمون | روش آزمون | CELANESE GERMANY/C52021 |
---|---|---|---|
Ball Pressure Test | 30sec数值 | ISO 2039 part 1 | 148 Mpa |
Bending modulus | ISO 178 | 2800 Mpa | |
Charpy Notched Impact Strength | 23℃ | ISO 179 1eA | 0.55 J/cm |
低温-30℃ | ISO 179 1eA | 0.5 J/cm | |
elongation | 50mm/min | ISO 527 part 1/2 | 7 % |
Elongation at Break | 50mm/min | ISO 527 part 1/2 | 15 % |
Impact strength of simply supported beam without notch | 低温-30℃ | ISO 179 1eU | 10 J/cm |
23℃ | ISO 179 1eU | 10 J/cm | |
Tensile creep modulus | 1000 hours | ISO 899 part 1 | 1300 Mpa |
1 hour | ISO 899 part 1 | 2500 Mpa | |
Tensile modulus | 1mm/min | ISO 527 part 1/2 | 3000 Mpa |
tensile strength | 50mm/min,Yield | ISO 527 part 1/2 | 65 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | CELANESE GERMANY/C52021 |
---|---|---|---|
Dielectric constant | 1 MHz | IEC 60250 | 4.0 |
低频100 Hz | IEC 60250 | 4.0 | |
Dielectric strength | IEC 60243 part 1 | 35 KV/mm | |
Dissipation factor | 低频100 Hz | IEC 60250 | 0.003 |
1 MHz | IEC 60250 | 0.005 |