مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

Phenolic PF 6506 Hexion Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| Supplementary Information | شرایط آزمون | روش آزمون | Hexion Inc./PF 6506 |
|---|---|---|---|
| Compression molding pressure | >15.0 MPa | ||
| Compression molding temperature | 160to190 °C |
| hardness | شرایط آزمون | روش آزمون | Hexion Inc./PF 6506 |
|---|---|---|---|
| Ball Pressure Test | H961/30 | ISO 2039-1 | 450 MPa |
| thermal performance | شرایط آزمون | روش آزمون | Hexion Inc./PF 6506 |
|---|---|---|---|
| Hot deformation temperature | 8.0MPa,Unannealed | ISO 75-2/C | 190 °C |
| mechanical properties | شرایط آزمون | روش آزمون | Hexion Inc./PF 6506 |
|---|---|---|---|
| Bending modulus | ISO 178 | 14000 MPa | |
| bending strength | ISO 178 | 140 MPa | |
| Compressive stress | ISO 604 | 250 MPa |
| Electrical performance | شرایط آزمون | روش آزمون | Hexion Inc./PF 6506 |
|---|---|---|---|
| Compared to the anti leakage trace index | SolutionA | IEC 60112 | PLC 4 |
| Dielectric strength | 1.00mm | IEC 60243-1 | 26 kV/mm |
| Dissipation factor | 100Hz | IEC 60250 | 0.050 |
| Relative permittivity | 100Hz | IEC 60250 | 7.00 |
| Surface resistivity | IEC 60093 | 1E+11 ohms | |
| Volume resistivity | IEC 60093 | 1E+12 ohms·cm |
| Physical properties | شرایط آزمون | روش آزمون | Hexion Inc./PF 6506 |
|---|---|---|---|
| Apparent density | ISO 60 | 0.73 g/cm³ | |
| density | 23°C | ISO 1183 | 1.72 g/cm³ |
| Shrinkage rate | ISO 2577 | 0.10 % | |
| Water absorption rate | ISO 62 | 10.0 mg |
| impact performance | شرایط آزمون | روش آزمون | Hexion Inc./PF 6506 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 2.5 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 9.5 kJ/m² |
| flammability | شرایط آزمون | روش آزمون | Hexion Inc./PF 6506 |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | V-0 |