مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PEEK MOTIS™ LV Invibio Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| hardness | شرایط آزمون | روش آزمون | Invibio Inc./MOTIS™ LV |
|---|---|---|---|
| Rockwell hardness | M-Scale | ASTM D785 | 105 |
| thermal performance | شرایط آزمون | روش آزمون | Invibio Inc./MOTIS™ LV |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD:--3 | ASTM D696 | 1.2E-05 cm/cm/°C |
| MD:--4 | ASTM D696 | 1.5E-05 cm/cm/°C | |
| Melting temperature | 343 °C |
| mechanical properties | شرایط آزمون | روش آزمون | Invibio Inc./MOTIS™ LV |
|---|---|---|---|
| Bending modulus | -- | ISO 178 | 12500 MPa |
| --2 | ISO 178 | 6400 MPa | |
| bending strength | -- | ISO 178 | 230 MPa |
| --2 | ISO 178 | 164 MPa | |
| Compressive modulus | ISO 604 | 12000 MPa | |
| Compressive stress | ISO 604 | 200 MPa | |
| Poisson's ratio | ASTME132 | 0.41 | |
| shear modulus | ISO 15310 | 2200 MPa | |
| shear strength | ASTM D732 | 94.0 MPa | |
| Tensile modulus | ISO 527-2 | 15000 MPa | |
| Tensile strain | Break2 | ISO 527-2 | 2.8 % |
| Break | ISO 527-2 | 2.0 % | |
| tensile strength | Yield | ISO 527-2 | 155 MPa |
| Yield2 | ISO 527-2 | 98.0 MPa |
| Physical properties | شرایط آزمون | روش آزمون | Invibio Inc./MOTIS™ LV |
|---|---|---|---|
| density | ISO 1183 | 1.42 g/cm³ | |
| Shrinkage rate | TD:210°C | 0.90 % | |
| MD:210°C | 0.10 % | ||
| Water absorption rate | 23°C,24hr | ISO 62 | 0.50 % |
| impact performance | شرایط آزمون | روش آزمون | Invibio Inc./MOTIS™ LV |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180 | 5.5 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180 | 30 kJ/m² |
| Filling analysis | شرایط آزمون | روش آزمون | Invibio Inc./MOTIS™ LV |
|---|---|---|---|
| MeltViscosity | Internal Method | 0.370 kPa |