مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PC 4610-10 STYRON TAIWAN
--
--
شفافیت,جریان متوسط,ویژگی ها: تحرک متوسط,شفافیت,ویژگی ها: تحرک متوسط,شفافیت
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
Other performance | شرایط آزمون | روش آزمون | STYRON TAIWAN/4610-10 |
---|---|---|---|
Glow wire combustion index (GWFI) | 2.0mm | IEC 695-2-1 | 960 °C |
Basic Performance | شرایط آزمون | روش آزمون | STYRON TAIWAN/4610-10 |
---|---|---|---|
density | ASTM D-792 | 1200 kg/m | |
melt mass-flow rate | 300℃/1.2kg | ASTM D-1238 | 10 g/10min |
thermal performance | شرایط آزمون | روش آزمون | STYRON TAIWAN/4610-10 |
---|---|---|---|
Ball indentation temperature | IEC 598-1 | >125 °C | |
Hot deformation temperature | Annealed@0.45MPa | ASTM D-648 | 144 °C |
Annealed@1.82MPa | ASTM D-648 | 140 °C | |
Unannealed@1.82MPa | ASTM D-648 | 127 °C | |
Shrinkage rate | 50℃/hr,50n重 | ASTM D-1525 | 154 °C |
mechanical properties | شرایط آزمون | روش آزمون | STYRON TAIWAN/4610-10 |
---|---|---|---|
Bending modulus | ASTM D-790 | 2400 Mpa | |
bending strength | ASTM D-790 | 100 Mpa | |
elongation | Break | ASTM D-638 | 120 % |
elongation at yield | ASTM D-638 | 6 % | |
Impact strength of cantilever beam gap | 23℃ | ASTM D-256 | 900 J/m |
Suspended wall beam without notch impact strength | 23℃ | ASTM D-256 | 未破裂 |
Tensile modulus | ASTM D-638 | 2240 Mpa | |
tensile strength | Yield | ASTM D-638 | 61 Mpa |
Break | ASTM D-638 | 66 Mpa |
Physical properties | شرایط آزمون | روش آزمون | STYRON TAIWAN/4610-10 |
---|---|---|---|
Shrinkage rate | ASTM D-955 | 0.005-0.007 mm/mm | |
UL flame retardant rating | 3.2mm | UL 94 | V-0 |
1.6mm | UL 94 | V-2 |