PC/ABS CX7240 PC/ABS vs. - Plastic Material Properties Comparison Chart at Plas.com

mechanical properties	شرایط آزمون	روش آزمون	SABIC INNOVATIVE US/CX7240
bending strength		ISO 178	96.0 Mpa
elongation	Break	ASTM D638	100 %
Tensile modulus		ASTM D638	2600 Mpa
bending strength	Yield,50.0mmSpan	ASTM D790	104 Mpa
tensile strength	Break	ASTM D638	58.0 Mpa
Bending modulus		ISO 178	2500 Mpa
Tensile strain	Yield	ISO 527-2/50	4.0 %
elongation	Yield	ASTM D638	4.1 %
Bending modulus	50.0mmSpan	ASTM D790	2500 Mpa
Tensile modulus		ISO 527-2/1	2600 Mpa
tensile strength	Break	ISO 527-2/50	50.0 Mpa
tensile strength		Yield	ISO 527-2/50	65.0 Mpa
Tensile strain	Break	ISO 527-2/50	90 %
tensile strength	Yield	ASTM D638	65.0 Mpa
Physical properties	شرایط آزمون	روش آزمون	SABIC INNOVATIVE US/CX7240
density		ISO 1183	1.20 g/cm³
melt mass-flow rate	260°C/2.16kg	ASTM D1238	18 g/10min
Melt Volume Flow Rate (MVR)	260°C/2.16kg	ISO 1133	15.0 cm3/10min
density		ASTM D792	1.19 g/cm³
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.10 %
Shrinkage rate	MD：3.20mm	Internal Method	0.40-0.60 %
Water absorption rate	Saturation,23°C	ISO 62	0.20 %
flammability	شرایط آزمون	روش آزمون	SABIC INNOVATIVE US/CX7240
Extreme Oxygen Index		ISO 4589-2	35 %
Hot filament ignition temperature	0.75mm13	IEC 60695-2-13	775 °C
		3.0mm13	IEC 60695-2-13	775 °C
		1.5mm13	IEC 60695-2-13	775 °C
UL flame retardant rating	1.5mm	UL 94	5VB
Burning wire flammability index	0.75mm	IEC 60695-2-12	960 °C
Hot filament ignition temperature	1.0mm	IEC 60695-2-13	825 °C
Burning wire flammability index	0.75mm13	IEC 60695-2-12	960 °C
UL flame retardant rating	0.75mm	UL 94	V-0
UL flame retardant rating		3.0mm	UL 94	5VA
Hot filament ignition temperature	3.0mm	IEC 60695-2-13	800 °C
UL flame retardant rating	0.60mm	UL 94	V-1
thermal performance	شرایط آزمون	روش آزمون	SABIC INNOVATIVE US/CX7240
Linear coefficient of thermal expansion	TD：-40to40°C	ASTME831	7.5E-05 cm/cm/°C
RTI Str		UL 746	90.0 °C
Ball Pressure Test	75°C	IEC 60695-10-2	Pass
Linear coefficient of thermal expansion	TD：-40to40°C	ISO 11359-2	7.5E-05 cm/cm/°C
Vicat softening temperature	--	ISO 306/B50	110 °C
Hot deformation temperature	1.8MPa,Unannealed,64.0mmSpan	ISO 75-2/Af	93.0 °C
		1.8MPa,Unannealed,3.20mm	ASTM D648	89.0 °C
		1.8MPa,Unannealed,6.40mm	ASTM D648	99.0 °C
Linear coefficient of thermal expansion	MD：-40to40°C	ISO 11359-2	7.5E-05 cm/cm/°C
Linear coefficient of thermal expansion		MD：-40to40°C	ASTME831	7.5E-05 cm/cm/°C
RTI Elec		UL 746	90.0 °C
RTI Imp		UL 746	90.0 °C
thermal conductivity		ISO 8302	0.20 W/m/K
Vicat softening temperature	--	ISO 306/B120	113 °C
Vicat softening temperature			ASTM D152512	110 °C
Hot deformation temperature	0.45MPa,Unannealed,3.20mm	ASTM D648	100 °C
Electrical performance	شرایط آزمون	روش آزمون	SABIC INNOVATIVE US/CX7240
Hot wire ignition	HWI	UL 746	PLC 3
Volume resistivity		IEC 60093	>1.0E+15 ohms·cm
Compared to the anti leakage trace index	CTI	UL 746	PLC 3
High arc combustion index	HAI	UL 746	PLC 0
Surface resistivity		IEC 60093	>1.0E+15 ohms
Dielectric strength	3.20mm,in Oil	IEC 60243-1	17 KV/mm
		1.60mm,in Oil	IEC 60243-1	25 KV/mm
		0.800mm,in Oil	IEC 60243-1	35 KV/mm
impact performance	شرایط آزمون	روش آزمون	SABIC INNOVATIVE US/CX7240
Impact strength of cantilever beam gap	-30°C9	ISO 180/1A	10 kJ/m²
		-30°C	ASTM D256	180 J/m
		23°C10	ISO 180/1A	20 kJ/m²
		-30°C10	ISO 180/1A	10 kJ/m²
Charpy Notched Impact Strength	-30°C7	ISO 179/1eA	10 kJ/m²
		23°C8	ISO 179/1eA	22 kJ/m²
		23°C7	ISO 179/1eA	20 kJ/m²
Impact strength of cantilever beam gap	23°C	ASTM D256	700 J/m
Impact strength of cantilever beam gap		23°C9	ISO 180/1A	25 kJ/m²
Dart impact	23°C,TotalEnergy	ASTM D3763	65.0 J

تماس با ما

دریافت اپلیکیشن

Top