مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

LCP A435 CELANESE USA
VECTRA®
کاربردهای خودرو,قطعات لوازم خانگی
عقب نشینی,افزایش,تقویت فیبر شیشه ای
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
Basic Performance | شرایط آزمون | روش آزمون | CELANESE USA/A435 |
---|---|---|---|
density | ISO 1183 | 1620 kg/m |
thermal performance | شرایط آزمون | روش آزمون | CELANESE USA/A435 |
---|---|---|---|
Combustibility | UL 94 | V-0 | |
Crystallization peak temperature | 10℃/min | ISO 11357-1 | 280 °C |
Hot deformation temperature | 1.80MPa | ISO 75-1 | 230 °C |
0.45MPa | ISO 75-1 | 250 °C | |
8.00MPa | ISO 75-1 | 162 °C | |
Linear coefficient of thermal expansion | normal | ISO 11359-1 | 0.000019 cm/cm℃ |
parallel | ISO 11359-1 | 0.0 cm/cm℃ | |
Vicat softening temperature | 50℃/h 50N | ISO 306 | 146 °C |
mechanical properties | شرایط آزمون | روش آزمون | CELANESE USA/A435 |
---|---|---|---|
Bending modulus | 23℃ | ISO 178 | 10500 Mpa |
bending strength | 23℃ | ISO 178 | 210 Mpa |
Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 26.0 KJ/m |
elongation | Break | ISO 527-1 | 3.3 % |
Impact strength of cantilever beam gap | 23℃ | ISO 180/1A | 23.0 KJ/m |
Impact strength of simply supported beam without notch | 23℃ | ISO 179/1eU | 38.0 KJ/m |
Rockwell hardness | ISO 2039-2 | 55 M Scale | |
Suspended wall beam without notch impact strength | 23℃ | ISO 180/1U | 33.0 KJ/m |
Tensile modulus | ISO 527-1 | 11000 Mpa | |
tensile strength | ISO 527-1 | 175 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | CELANESE USA/A435 |
---|---|---|---|
Compared to the Leakage Traceability Index (CTI) | IEC 60112 | 175 | |
Dielectric loss | 100Hz | IEC 60250 | 0.020 |
1000Hz | IEC 60250 | 0.016 | |
Dielectric strength | IEC 60243-1 | 32 KV/mm | |
Relative permittivity | 100Hz | IEC 60250 | 3.50 |
1000Hz | IEC 60250 | 3.10 | |
Surface resistivity | IEC 60093 | >1.0E+15 ohms | |
Volume resistivity | IEC 60093 | 1E+13 ohm.m |
Physical properties | شرایط آزمون | روش آزمون | CELANESE USA/A435 |
---|---|---|---|
Shrinkage rate | parallel | ISO 2577 | 0.40 % |
normal | ISO 2577 | 0.10 % |